Installation guide

AP-IP300 IP Phone Installation Guide Version 1.0
AddPac Technology Proprietary & Documentation
150
Chapter 7. Appendix
This Appendix provides information about the Pinout specifications of the following cables used with
AP-IP200 IP Phone.
z Console Port Signal and Pinout (RJ-45 to DB9)
z Ethernet UTP Cable Assemble (RJ-45 to RJ-45) Pinout
[RS-232C Console Port Signal & Pinout ]
In order to connect RS-232C console port with the Terminal Emulating PC, the RJ-45 to DB9
(Female DTE Connector) cable is used. The transferred signal and Pinout specifications are enlisted
in the following table.
[Table 7-1] The signal and Pinout specification
RS-232C Console
Port (DTE)
RJ-45 DB-9 Console Port (PC)
Signal RJ-45 Pin DB-9 Pin Signal
RTS 1 8 CTS
DTR 2 6 DSR
TxD 3 2 RxD
GND 4 5 GND
GND 5 5 GND
RxD 6 3 TxD
DSR 7 4 DTR
CTS 8 7 RTS