Installation guide

AP-IP300 IP Phone Installation Guide Version 1.0
AddPac Technology Proprietary & Documentation
147
Entering the Boot Loader mode
Since AP-IP100 does not have console interface, it is not possible to enter the mode of Boot Loader
by using ‘ctrl+x’, ctrl+c’ , which is possible for APOS with presence of console such as ‘send break’.,
during the booting process.
During the booting process, AP-IP100 checks the basic operation of CPU, memory and interface.
Then it waits for about 3 seconds for the user to make an access. In this status, you can see the LED
on the front side is beginning to be turned on one after another
While LAN1 interface of AP-IP100 and PC are connected directly to each other, the user can access
to AP-IP100 when the LED is turned on one after another.
In general, TELNET is used for an access to check the password or resetting the APOS settings. To
download APOS image, the user can access to FTP server (to get into the mode of Boot Loader, enter
‘root’ is for the ID and ‘router’ for the password.