AP-IP300 IP Phone Installation Guide Version 1.0 AP-IP300 IP Phone [Installation and Operation Guide] November, 2007 AddPac Technology www.addpac.
AP-IP300 IP Phone Installation Guide Version 1.0 AP-IP300 IP Phone Note. The specifications and information in this guide are subject to change without notice. All statements, information, and recommendations in this guide are believed to be accurate but are presented without warranty of any kind, express or implied.
AP-IP300 IP Phone Installation Guide Version 1.0 [Contents] Getting into AP-IP100 IP Phone Installation Guide .......................................................... 11 Chapter 1. Introduction ................................ 13 Introduction ......................................................................................................................... 13 Product Overview ...............................................................................................................
AP-IP300 IP Phone Installation Guide Version 1.0 Tool Box – Factory Default................................................................................................. 64 Tool Box – Ring ................................................................................................................... 65 Tool Box – Power Save....................................................................................................... 67 Tool Box – Version Information ..........................................
AP-IP300 IP Phone Installation Guide Version 1.0 Application - Application – Remote Broadcast .............................................................. 122 Application - Application Setup – Chime Setup............................................................. 123 Application - Application Setup – Client Info Setup ...................................................... 124 Application – Client Info...................................................................................................
AP-IP300 IP Phone Installation Guide Version 1.
AP-IP300 IP Phone Installation Guide Version 1.
AP-IP300 IP Phone Installation Guide Version 1.
AP-IP300 IP Phone Installation Guide Version 1.0 [Tables] [Table 1-1] List of Hardware Specification ............................................................................. 16 [Table 1-2] AP-IP300 Software Specification ......................................................................... 17 [Table 1-3] Description of the Button Features on the Front Side ......................................... 20 [ 1-4] Description of the Interfaces on the Rear Side ...........................................
AP-IP300 IP Phone Installation Guide Version 1.0 [Table 4-17] Description of PPPPoE Menu Screen ............................................................... 80 [Table 4-18] Description of Static IPv6 Menu Screen ............................................................ 81 [Table 4-19] Description of IPv6 EUI-64 Menu Screen.......................................................... 82 [Table 4-20] Description of LAN Setup Menu Screen............................................................
AP-IP300 IP Phone Installation Guide Version 1.0 Getting into AP-IP100 IP Phone Installation Guide This chapter explains the AP-IP300 IP phone installation guide. [Contents of AP-IP300 Installation Guide] The purpose of this guide is to assist the users to install the AP-IP200 IP Phone easily. This guide is composed of six chapters as to follow. If you have a previous experience of using IP Phone, please refer to the chapters the user wants to know directly.
AP-IP300 IP Phone Installation Guide Version 1.0 If you have any questions and need any technical support of AP-IP300, please contact AddPac Technology in the followings: AddPac Technology Co., Ltd. 2nd Fl. Jeong-Am Building, 769-12 Yeoksam-Dong, Kangnam-Ku, Seoul , Korea Phone (02) 568-3848 Fax (02) 568-3847 E-mail : info@addpac.com http://www.addpac.
AP-IP300 IP Phone Installation Guide Version 1.0 Chapter 1. Introduction Introduction AP-IP300 IP phone is designed to provide enhanced IP telephony functionality to meet the wide range of business user requirements. This IP telephone optimally delivers rich featured voice telephony service on ordinary internet infrastructure as well as AddPac IP-PBX environment on local LAN as a fully featured IP extension for the complete AddPac VoIP solution. Product Overview 1.
AP-IP300 IP Phone Installation Guide Version 1.0 Designed on programmable high performance RISC CPU and DSP, AP-IP300 is capable of adopting new capabilities and improvement by downloading firmware from website or with its auto-upgrade option as the customers' needs grow. Moreover, operators can download the latest protocol or service improvements as well as update firmware by checking the version and activating the auto-upgrade while AddPac's IP-PBX power on/booting sequence. 4.
AP-IP300 IP Phone Installation Guide Version 1.
AP-IP300 IP Phone Installation Guide Version 1.0 AP-IP300 IP Phone Hardware Specification [Table 1-1] List of Hardware Specification Category Specification Model AP-IP300 Product Category IP Phone (Built-in Speaker Phone) Microprocessor High Performance RISC CPU Architecture Digit and Key Buttopns 3 x 4 Standard Numeric Buttons, 17 Menu/ Function Key Speed Dialing Keys, 25 Speed-Dial and Presence Indication Keys LCD Display Memory Audio Interface Graphic LCD 4.
AP-IP300 IP Phone Installation Guide Version 1.0 AP-IP300 IP Phone Software Specification [Table 1-2] AP-IP300 Software Specification Category Specification LAN Protocol Static and IEEE 802.1Q VLAN Routing, RIP v1/v2, OSPF v2 WAN Protocol Point-to-Point Protocol (PPPoE for ADSL), etc. Audio Service Voice Codec & - G.711, G.723.1, G.726, G.729, etc. Signaling Protocol H.323, SIP, and MGCP Triple Stack Support ITU-T H.323 v3 VoIP Protocol with ITU-T H.
AP-IP300 IP Phone Installation Guide Version 1.
AP-IP300 IP Phone Installation Guide Version 1.0 The Upper View This chapter explains the front part’s DIAL and FUNCTION KEY of AP-IP300 IP Phone. The external case is made of high degree of solidity ABS. Main key buttons are equipped on front part so that user can operate all the functions with these buttons.
AP-IP300 IP Phone Installation Guide Version 1.0 The following Table 1-3explains each button feature of AP-IP300 on the front side. [Table 1-3] Description of the Button Features on the Front Side No. Button Names Features (1) Speed Dial Brings out the Speed-Dial Menu (2) F1~F4 The soft keys which are displayed on the bottom of LCD screen and can be assigned with each different function such as Phonebook and Speed-Dial.
AP-IP300 IP Phone Installation Guide Version 1.0 The Layout of the Rear Side The rear side is composed of FXO PSTN backup interface, USB interface, power switch and connector and two (2) Fast Ethernet for WAN/LAN connections. (Figure 1-3) The Rear Side [Table 1-4] explains the interfaces on the rear side. [ 1-4] Description of the Interfaces on the Rear Side No.
AP-IP300 IP Phone Installation Guide Version 1.0 Chapter 2. Preparing for Installation Installation Requirement The followings are the recommendation for safe operation of the equipment. • Ensure AP-IP200 IP Phone is in a dust-free environment before and after installation. • Ensure AP-IP200 IP Phone upper part is empty on a flat and safe surface. • To prevent accidents, avoid ties, scarf, sleeves, and any other loose clothing from entangling with the chassis.
AP-IP300 IP Phone Installation Guide Version 1.0 General Requirement The AP-IP300 IP Phone is ready for use where electronic products are used. However, locations with the following conditions are recommended for maximum performance: • A level and well ventilated location is recommended. • Secure the equipment safely where intended to install. • Avoid placing objects on top of the equipment. • Install the equipment in a cool location avoiding direct sunlight.
AP-IP300 IP Phone Installation Guide Version 1.0 Prerequisites for Installation The user should consider the EMI standards and distance limitations (EIA recommendation) when installing the AP-IP300 IP Phone. The following section describes the Ethernet cable and the RS-232C console cable APIP300 supports. Prerequisites for Installation Unless a separate order is made, the tools and certain cables are not provided in the package. Prepare the following equipments and tools before installation.
AP-IP300 IP Phone Installation Guide Version 1.0 Unpacking and Verifying the Contents Before unpacking, check for external damage of the packaging box.
AP-IP300 IP Phone Installation Guide Version 1.0 Chapter 3. Installation Connecting Ethernet Interface • Connect AP-IP200’s LAN interface to LAN interface of WAN equipment (Router or ADSL/Cable modem) with RJ45 UTP cable. • There might be some cases of direct connection to router or modem with cross-over cable. • Please use direct-through cable to connect to HUB.
AP-IP300 IP Phone Installation Guide Version 1.0 • AP-IP300 IP Phone’s Fast Ethernet PC Interface is supposed to be connected into Desktop PC’s LAN Port with Direct-Through cable in IP-Share mode and to be connected into HUB in NAT/PAT or Bridge mode. • In case of connecting directly to Desktop PC’s LAN Port, please use Direct-Through cable. • In case of connecting directly to HUB, please use Cross-over cable.
AP-IP300 IP Phone Installation Guide Version 1.0 Connecting PSTN (FXO) interface The FXO PSTN interface port is available when PSTN access-line is used or impossible to make a VoIP call due to network problem. PSTN backup is implemented by connecting PSTN access-line to PSTN port, illustrated as following figure.
AP-IP300 IP Phone Installation Guide Version 1.0 Connecting Audio-In/Out Interface for Headset Audio-In/Out port located at left side of AP-IP300 IP Phone is for audio devices such as MIC, Speaker System or Headset Device etc. Connect this port to MIC system or External Speaker System using ‘3.5mm stereo jack’ cable.
AP-IP300 IP Phone Installation Guide Version 1.0 Structural Diagram of User Interface Menu When you press the Menu key, you can see all the lists of options as they are shown in Figure 3-5. You can use the Menu key even while you are having a conversation on the phone.
AP-IP300 IP Phone Installation Guide Version 1.
AP-IP300 IP Phone Installation Guide Version 1.0 Using the Dial Pad Buttons You can enter the characters by using the dial pad buttons in the Menu options: (Figure 3-6) Dial Pad Buttons [Table 3-1] The Characters Associated with the Dial Pad Buttons Dial Pad Characters Description Buttons 1 1 < > & ( ) The characters can be changed in the order as you press the same button consistently.
AP-IP300 IP Phone Installation Guide Version 1.
AP-IP300 IP Phone Installation Guide Version 1.0 Using Send/End Button The functions of Call button is described in Table 3-2 below: [Table 3-2] Using the Call Button on the Dial Pad Functions Retrieving Descriptions the When you just press the Call button and leaving the phone is on the hook, the Recent recent incoming calls are listed.
AP-IP300 IP Phone Installation Guide Version 1.0 Using Softkeys Supported by SSCP Softkey functions are supported by SSCP and change depending on the status of the phone (for example, when you are on a call or the phone is not in use) which are shown at the bottom of the LCD screen and they are interconnected with the 4 buttons of the softkey. When more than 4 softkeys present, you can see more softkeys by pressing F4 (‘More’) in the next screen.
AP-IP300 IP Phone Installation Guide Version 1.0 group 4 EndC (End Call) Ends a call [Table 3-6] When You are Busy on Line No Function Description 1 Hold Places a call on hold 2 EndC (End Call) Ends a call 3 Tran(Transfer) Transfers a call to the other extension 4 Park Allows you to place an incoming call on hold by pressing Park button, then you can see the Park number on the LCD screen.
AP-IP300 IP Phone Installation Guide Version 1.
AP-IP300 IP Phone Installation Guide Version 1.
AP-IP300 IP Phone Installation Guide Version 1.0 Basic CLI Command for Network Setup * CLI command for Looking up the Configured Settings IP300# show run Building configuration... Current configuration: ! hostname IP300 ! username root password router administrator ! ! interface Loopback0 ip address 127.0.0.1 255.0.0.0 ! interface FastEthernet0/0 ip address 172.20.103.100 255.255.0.
AP-IP300 IP Phone Installation Guide Version 1.0 * Configuring IP Addresses and Default Route Settings IP300# configure terminal IP300(config)# → Fast Ethernet Interface 0 Port IP300(config)# interface FastEthernet 0/0 IP300(config-if)# ip address 172.20.103.1 255.255.0.0 → IP address setting IP300(config-if)# VOIP_INTERFACE_DOWN VOIP_INTERFACE_DOWN VOIP_INTERFACE_UP : (172.20.103.1) IP300(config-if)# exit IP300(config)# IP300(config)# ip route 0.0.0.0 0.0.0.0 172.20.1.
AP-IP300 IP Phone Installation Guide Version 1.0 Chapter 4. Using AP-IP300 Default Screen Once the start-up operation is completed, the default screen is organized as it is shown in Figure 4-1. ② ① ③ (Figure 4-1) Default Screen [Table 4-1] Description of the Default Screen No. Description Date and Time ① Display the present date & time.
AP-IP300 IP Phone Installation Guide Version 1.0 (Figure 4-2) Basic Screen Layout < Reference: The Speed Button Map can take the speed button information for the Presence Server after registering to the server or the user can create one’s own speed button map. The screen can be changed by the Speed Button Key on the upper right side.
AP-IP300 IP Phone Installation Guide Version 1.0 Phone Book Menu The Phone Book is a directory in which user can search by name and number and has the functions including phone number registration, recent call history, group lookup, button list, the default setting. It also has call log and speed dial menu.
AP-IP300 IP Phone Installation Guide Version 1.0 Phonebook – Searching a Phone Number The Phonebook uses the registered name, phone number and speed dial number to search the phone number.
AP-IP300 IP Phone Installation Guide Version 1.0 [Table 4-2] Description of Search Menu Screen in the Phonebook Phonebook Search Menu Description The search by NAME looks for the registered name throughout the Phone book with the previously saved name. Therefore, cursor automatically moves to the right category in accordance with inputting the letter. If more than 2 same fields are found in the name including the letter for the search word, all the names with this filed are to be displayed.
AP-IP300 IP Phone Installation Guide Version 1.
AP-IP300 IP Phone Installation Guide Version 1.0 Phonebook – Registration The registration menu takes a new phone number. The user can enter a name, telephone number, speed dial, speed button, IP address or codec information in the Phone Book. The entered phone numbers can be used for speed dial, search and speed button.
AP-IP300 IP Phone Installation Guide Version 1.0 [Table 4-3] Description of Registration Menu Screen in the Phonebook Registration Menu Description 1. Enter a new name in the Phonebook 2. Select the group to which the number to registered 3. Enter a phone number 4. Enter a speed button number ranging from 1 to 25 5. Enter a speed dial number in the phonebook ranging from 1 to 25 * If user wants to apply the registered value in the menu, the user should press the OK button.
AP-IP300 IP Phone Installation Guide Version 1.0 (Figure 4-9) Advanced Registration Setup Screen (Figure 4-10) Advanced Setup for Registration Screen [Table 4-4] Description of Advanced Setup for Registration Screen Registration Description 1.
AP-IP300 IP Phone Installation Guide Version 1.0 2. Select a type of audio codec. 3.
AP-IP300 IP Phone Installation Guide Version 1.0 Phonebook- Contact Group The user can specify a group during registration to the phonebook. The specified group can be set with an icon, a bell sound and secret group. The added group can be applied right after the phonebook registration.
AP-IP300 IP Phone Installation Guide Version 1.
AP-IP300 IP Phone Installation Guide Version 1.0 Phonebook – Button List The Button list is laid out with the names of speed buttons and phone numbers. By using the saved list, the outgoing call can be carried out by Send button, OK button of the keypad and 25 speed buttons. Also editing and deleting of the speed button is possible on the Button List screen.
AP-IP300 IP Phone Installation Guide Version 1.0 (Figure 4-14) Editing Screen in the Button List [Table 4-6] Description of the Editing Screen in the Button List Category Description Name Set a name for the Speed Button.
AP-IP300 IP Phone Installation Guide Version 1.0 Phonebook – Recent Call The recent call displays a call log of the user for incoming and outgoing calls. This feature enables the user to check any incoming call which has been arrived during one’s absence, calls back by using the number of the incoming call and save the number of the incoming calls.
AP-IP300 IP Phone Installation Guide Version 1.0 [Table 4-7] Description of the Recent Call Screen Category Description Displays an incoming call ① incoming/ outgoing Displays that the incoming call has not been answered Displays an outgoing call Displays that the outgoing call has not been answered ② Remote Display the call number for placing a call to the other party directly. This Information call information is displayed by H.323 protocol (H.
AP-IP300 IP Phone Installation Guide Version 1.0 Phonebook – Button Profile The Button Profile can interoperate with the Presence Server only. The user can choose the Button Profile form the Speed Button list which has been provided from the server. In order to interoperate with the Presence Server, you need to set up [4. Network and Call Setup – 10. Presence] first.
AP-IP300 IP Phone Installation Guide Version 1.0 [Table 4-8] Description of Button Profile Menu Screen Category Description Private IP300 Assign a phone number to the Speed Button directly.
AP-IP300 IP Phone Installation Guide Version 1.0 Phonebook – Initialize PB The default mode initialization feature deletes all the configured settings of AP-IP300 and all the content of Phonebook, Speed Button numbers and recent cal. This command reboots the system automatically.
AP-IP300 IP Phone Installation Guide Version 1.0 Tool Box Menu Tool Box menu consists of date/time setting, configuration saving, initialization for factory default mode and language selection.
AP-IP300 IP Phone Installation Guide Version 1.0 Tool Box – Date & Time The user can set the date and time.
AP-IP300 IP Phone Installation Guide Version 1.
AP-IP300 IP Phone Installation Guide Version 1.0 Tool Box – Save All This UI menu saves the settings which the user has entered in UI. Once the settings are saved, values are preserved even after rebooting.
AP-IP300 IP Phone Installation Guide Version 1.0 Tool Box – Factory Default The Factory Default deletes all the configured settings of AP-IP300 and all the content on phone book and recent call menu. This command reboots the system automatically. This command is not recommended to use except for some inevitable circumstances.
AP-IP300 IP Phone Installation Guide Version 1.0 Tool Box – Ring You can set the ringer up to 8 different kinds of sound including mute on the integrated speaker, in the ringer settings. The user can choose the sound that one likes after hearing the 7 different kinds of sound, except the mute, by using F1(Play). Also the volume can be adjusted.
AP-IP300 IP Phone Installation Guide Version 1.
AP-IP300 IP Phone Installation Guide Version 1.0 Tool Box – Power Save The Power Save turns off the LCD automatically in a specified time. The LCD can be turned on again by pressing any button on the key pad from the state of Power Save. This setting is recommended for preserving the life time of LCD and maintaining its quality.
AP-IP300 IP Phone Installation Guide Version 1.0 Tool Box – Version Information This option allows you to verify the version of the software running at this present time. ` (Figure 4-25) Information Menu Screen [Table 4-11] Description of Information Menu Screen Category SW Name SW Version Description This is the name of the firmware running at this present time.
AP-IP300 IP Phone Installation Guide Version 1.0 Tool Box – Language This option allows you to verify the language being used at this present time.
AP-IP300 IP Phone Installation Guide Version 1.0 Tool Box – Password The Password blocks the access to a particular menu and it can be changed. The default password is 2337. Changing APOS password is not recommended as possible.
AP-IP300 IP Phone Installation Guide Version 1.0 (Figure 4-27) Password Menu Screen [Table 4-13] Description of the Password Menu Screen Category Description Use Password Set/ Cancel the password (default : cancel) The password can be set to [Factory Default] [Internet Setup] [VoIP Setup] [Message] [Personal Information Setup] [Speed Dial Number Setup] menus. Change Password Change the password APOS Password Change APOS password. It is not recommended to change this password as much as possible.
AP-IP300 IP Phone Installation Guide Version 1.0 AV Setup Menu AV Setup consists of Volume and Audio Codec.
AP-IP300 IP Phone Installation Guide Version 1.0 AV Setup – Volume The Volume menu consists of Bell Volume, Input/Output Volume Adjustment and External Microphone.
AP-IP300 IP Phone Installation Guide Version 1.0 [Table 4-14] Description of Volume Setup Screen Category Description Bell Sound Volume Adjust the bell sound volume. The default is set to 5. Input Volume Adjust the input volume of the speaker phone and sender/receiver. The default is set to 5. Output Volume Adjust the output volume of the speaker phone and sender/receiver. The default is set to 5. External Microphone Boost Select Boost, when the audio input is set to MIC.
AP-IP300 IP Phone Installation Guide Version 1.0 AV Setup – Audio Codec The Audio Codec determines a type of voice codec. You can choose the options of G.711[PCM] and G726, G.729, and G.723.1 on UI, basing on the priority level which can be suitable to your network settings.
AP-IP300 IP Phone Installation Guide Version 1.0 Network & Call Menu The Network & Call consists of WAN, LAN interface setting, SIP/H.323 signaling, FTP service, QoS, call options etc. The user should know this network setup menu for efficient usage of AP-IP200. This menu cannot be skipped for optimized environment.
AP-IP300 IP Phone Installation Guide Version 1.0 Network & Call – Internet Setup The Internet Menu has functions related to WAN interface for Internet connection. As there are various network environments, the user has to configure pursuant to his or her own network environment. The WAN protocols supported by AP-IP300 are DHCP, static IPv4, PPPoE, and IPv6 etc. The following figure shows the UI command tree structure in Network & Call Menu.
AP-IP300 IP Phone Installation Guide Version 1.0 (Figure 4-34) Internet Setup Menu Screen [Table 4-15] Description of Internet Setup Menu Screen Category Description DHCP Takes a dynamic IP address from DHCP server such as cable modem, VDSL, IP-ADSL. Static IP Configures IP address manually and build WAN interface such as static IP ADSL, E1/T1 leased line. PPPoE (Dynamic IP) Configures IP address manually and build WAN interface such as static IP ADSL, E1/T1 leased line.
AP-IP300 IP Phone Installation Guide Version 1.0 Network & Call – Internet Setup – IP Static IP This menu configures WAN interface such as static IP ADSL, E1/T1 leased line. (Figure 4-35) Static IP Menu Screen [Table 4-16] Description of Static IP Menu Screen Category Description IP Address IP Address Entry Ex> 172.20.1.100 Net mask Net Mask Entry Ex> 255.255.0.0 Primary Router Primary Router Entry Ex> 172.20.1.1 Primary DNS First DNS Entry (same as IPv6) Ex> 168.126.63.
AP-IP300 IP Phone Installation Guide Version 1.0 Network & Call – Internet Setup – PPPoE This is the WAN protocol which takes a dynamic IP address from the PPP Server. ADSL is one of the typical applications in which PPPoE is used.
AP-IP300 IP Phone Installation Guide Version 1.0 Network & Call – Internet Setup – Static IPv6 This menu configures WAN interface such as static IP ADSL, E1/T1 leased line. (Figure 4-37)Static IPv6 Menu Screen [Table 4-18] Description of Static IPv6 Menu Screen Category Description IPv6 Address IPv6 Address Entry Ex> 2001:e78:b01:17:114::10/64 Primary Router Primary IPv6 Router Address Entry Ex> 2001:e78:b01:17:114::1 Primary DNS Primary DNS Entry Ex> 168.126.63.
AP-IP300 IP Phone Installation Guide Version 1.0 Network & Call – Internet Setup – IPv6 EUI-64 This EUI-64 IPv6 address scheme configures company_id(24-bit) basing on the standard of IEEE Registration Authority and extension id(40-bit) basin on the same standard.
AP-IP300 IP Phone Installation Guide Version 1.0 Network & Call – LAN Setup This LAN menu is used for protocol setting of AP-IP200 second LAN interface which is used to connect PC or Ethernet Hub. None, DHCP for single (1) PC, DHCP for multiple PC are available as protocols for second fast ethernet LAN port. In DHCP protocol mode for single PC, for sharing public same IP address of AP-IP200’s WAN interface and LAN interface connected to PC, AddPac proprietary public IP-Share mechanism is used.
AP-IP300 IP Phone Installation Guide Version 1.0 (Figure 4-39) LAN Setup Menu Screen [Table 4-20] Description of LAN Setup Menu Screen Category Description Factory Set LAN to the factory default mode. (default : 192.168.10.
AP-IP300 IP Phone Installation Guide Version 1.0 Network & Call – Network Status This menu displays the current network status of Link Status, IPv4 Protocol, IPv4 address, LAN address, IPv6 Protocol, IPv6 address, DNS, SIP Proxy Server, GK[H.323] Registration Status at a glance.
AP-IP300 IP Phone Installation Guide Version 1.
AP-IP300 IP Phone Installation Guide Version 1.
AP-IP300 IP Phone Installation Guide Version 1.0 Network & Call – VoIP Setup This VoIP setup menu is used for interoperating with SIP server or Gatekeeper on H.323 and SIP basis and adjusting E.164, PSTN number and QoS. .
AP-IP300 IP Phone Installation Guide Version 1.0 Network & Call – VoIP Setup - VoIP Signaling This menu is used for VoIP signaling setup such as H.323, SIP protocol. There are 2 different ways: connecting directly to VoIP network and connecting indirectly through SIP proxy server. Each way needs the different optional settings. (Figure 4-42) VoIP Signaling Setup Menu Screen [Table 4-22] Description of VoIP Signaling Setup Menu Screen Category SIP Protocol H.
AP-IP300 IP Phone Installation Guide Version 1.0 Network & Call – VoIP Setup - VoIP Signaling- SIP Protocol This menu is used for configuring SIP protocol. There are 2 different ways: connecting directly to VoIP network and connecting indirectly through SIP proxy server. Each way needs the different optional settings.
AP-IP300 IP Phone Installation Guide Version 1.0 Network & Call – VoIP Setup - VoIP Signaling - H.323 Protocol This menu is used for configuring H.323 protocdol. There are 2 different ways: connecting directly to VoIP network and connecting indirectly through SIP proxy server. Each way needs the different optional settings. (Figure 4-44) H.323 Protocol Menu Screen [Table 4-24] Description of H.323 Protocol Menu Screen Category Description H.323 ID Enter a H.323 ID for Gatekeeper registration H.
AP-IP300 IP Phone Installation Guide Version 1.0 Network and Call – VoIP Setup – QoS QoS enables transferring range of voice packet within a bandwidth limit. The user has to calculate the bandwidth, then to apply it to QoS. (Figure 4-45) QoS Screen [Table 4-25] Description of QoS Screen Category Description QoS Disable Disable QoS QoS Enable Enable QoS QoSBandwidth QoS function is for WAN interface and cannot be applied to LAN interface.
AP-IP300 IP Phone Installation Guide Version 1.0 Network and Call – VoIP Setup – SIP Options This menu is used for configuring additional features and options of SIP protocol. These optional settings are dependent on the network configuration.
AP-IP300 IP Phone Installation Guide Version 1.0 [Table 4-26] Description of SIP Options SIP Options Description Call Transfer Mode Select the call-transfer mode. basic/attend. Conference Service Tag Enter a VoIP Tag for conference service Conference Service Name Enter a name for the conference service Enable Ping Enter firewall address to check the public IP address when AP-IP300 is used under NAT/Firewall network environment.
AP-IP300 IP Phone Installation Guide Version 1.0 Network & Call – VoIP Setup– PSTN Prefix When user wants to access the FXO interface for PSTN backup, this prefix number is used as PSTN access code. Additionally, AP-IP300 IP phone supports the PSTN back-up service when VoIP service is impossible due to network failure or VoIP call service is interrupted by an exception.
AP-IP300 IP Phone Installation Guide Version 1.0 Network & Call – Additional Service The Additional Service menu sets up Call Transfer, DND, Call Wait and Auto Response.
AP-IP300 IP Phone Installation Guide Version 1.0 Network & Call – Additional Service – Call Forward This is the menu sets up the call forward when the user is busy on line or unable to answer the call or forward a call unconditionally. When a call is forwarded, you can set the call to a specific number or voice mail. If you set it to the both, the voice message is applied.
AP-IP300 IP Phone Installation Guide Version 1.
AP-IP300 IP Phone Installation Guide Version 1.0 Network & Call – Additional Service – DND(Do Not Disturb) Do Not Disturb (DND) features allows you to turn off the ringer (Ring Silence) for an incoming call or to reject the call (Call Reject. You may hold pressing the leave of absence button of the IP-Phone for more than 2 seconds to enable or disable this function. The Call Reject can work only in the SSCP mode.
AP-IP300 IP Phone Installation Guide Version 1.
AP-IP300 IP Phone Installation Guide Version 1.0 Network & Call – Additional Service – Call Wait Setup Call Wait feature enables you to receive a second incoming call with on the same line without disconnecting the first call. This call feature allows you to receive an auditory call alert while you are on the first call. You can place the first on Hold and wait and connect to the second call. You can even return to the first call after you finish conversation with the second call.
AP-IP300 IP Phone Installation Guide Version 1.0 Network & Call – Additional Service – Auto Response This feature allows your telephone to answer a call automatically and you do not have to pick up the phone. You can set the interval of answering a call selectively: 3, 5, 10 or 15 seconds.
AP-IP300 IP Phone Installation Guide Version 1.0 Network & Call – Additional Service – Multi Number The Multi Number allows you to set the native number for the Outbound Call, as to select the one number among many numbers that have been assigned. You can take many numbers of incoming calls, but you can send only the predetermined number of the outgoing call at the default setting.
AP-IP300 IP Phone Installation Guide Version 1.0 Network & Call – Additional Service – Service Port This menu activates or deactivates FTP, TELNET, TFTP, SNMP protocol service of AP-IP300. You can use FTP to access to AP-IP300 from a remote location and Telnet is used for changing all kinds of information and monitoring and SNMP is also used to access to AP-IP300 from a remote location.
AP-IP300 IP Phone Installation Guide Version 1.0 [Table 4-33] Description of Service Port Menu Screen Category Description FTP Actives/Deactivates the FTP service protocol. Default is enable mode (activating FTP service). Default port number is 21. Actives/Deactivates the TELNET service protocol. TELNET Default is enable mode (activating TELNET service). Default port number is 23. Actives/Deactivates SNMP HTTP the SNMP service protocol. Default is enable mode (activating SNMP service).
AP-IP300 IP Phone Installation Guide Version 1.0 Network & Call – Additional Service – Auto Upgrade Whenever a new feature is added, the software (firmware) of the IP phone needs to be upgraded. One of the ways of doing this upgrade is download the new software by using a network transmission protocol such as ftp which is capable of transmitting a large files. This Auto Upgrade enables the phone to access a particular server and to compare the version of OS and Configuration.
AP-IP300 IP Phone Installation Guide Version 1.0 [Table 4-34] Description of Auto Upgrade Menu Screen Category Description URL Enter URL of the Auto Upgrade server Ex)down.addpac.com/apos/IP300/packing.lst Login Name Enter the ID for an authorized access to the Auto Upgrade server Ex) addpac Login Password Enter the password for an authorized access to the Auto Upgrade server Ex) addpac Interval Success (day) The succeeded Auto Upgrade can be kept in a record for a certain time.
AP-IP300 IP Phone Installation Guide Version 1.0 Network & Call – Additional Service – SSCP Setup SSCP Smart Service Control Portocol) is the AddPac proprietary protocol operates between the AddPac IP-PBX systems and IP terminals. The IP-PBX systems support many different call features, through SSCP, in addition to the basic call features of the IP Phone itself. The IP terminals take these call features supported by the IP-PBX, then it display these features on its softkeys.
AP-IP300 IP Phone Installation Guide Version 1.0 (Figure 4-57) SSCP Setup Menu Screen [Table 4-35] Description of SSCP Setup Screen Category SSCP Setup Call-manager 1 ~ 5 Description Either enable or disable the setting mode of SSCP (On/Off) Configure the Call Manager server: 5 servers can be configured redundancy, 2 at Call maximum.
AP-IP300 IP Phone Installation Guide Version 1.0 Network & Call – Presence When AP-IP300 is connected with Presence Server, the IP300 can take the Speed Button Key from the server. The LED of each speed button key is changed on real time basis, so the present status of the user can be informed. To be connected with Presence Server, you should know the address of the server, port number, ID and password.
AP-IP300 IP Phone Installation Guide Version 1.0 Network & Call – Presence – Presence In order to register to Presence Server, you may enter an ID and password. When you enter one server address and port, the Presence Server Number is indicated as 1. And then you may enter the ID and password which have been registered to the IP-PBX.
AP-IP300 IP Phone Installation Guide Version 1.0 Network & Call – Presence – Presence Server You can enter an IP and port to register to Presence Server. The default port number is 5051 and the server address supports both IPv4 / IPv6.
AP-IP300 IP Phone Installation Guide Version 1.0 Application Applications composed of a group of the call features including Message Box, Voice Mail Box, Conference. You can use Message Box and Voice Box only when they are connected to and supported by SSCP. You can make Conference calls on when they are connected to and supported by Multipoint Control Unit (MCU). For remote broadcasting, you may need the AddPac Broadcasting Equipment (AP3120) and Broadcasting management program (e-MBMS Server).
AP-IP300 IP Phone Installation Guide Version 1.0 Application – Voice Mail Voice Mail enables you to check the voice messages by pressing Play key. You should know the user’s password which has been registered to IP-PBX to listen to the voice messages. (Figure 4-63) Voice Mail Menu Screen [Table 4-38] Description of Voice Mail Menu Screen Category Voice Msg. Inbox Saved Voice Msg.
AP-IP300 IP Phone Installation Guide Version 1.
AP-IP300 IP Phone Installation Guide Version 1.0 Application – Conference This feature enables you to see the list of connections can be made for a conference call at the present time and you can join the conference by just pressing call button.
AP-IP300 IP Phone Installation Guide Version 1.0 [Table 4-39] Description of the Conference Room Menu Screen Category Description 1. The icon for the conference room represents the Dial-out conference 2. the name of the conference room 3. The Speed Dial Number for the Conference 4. The conference with 16 participants 5. locked for Secret Room: only the user who knows the password can enter 6 .
AP-IP300 IP Phone Installation Guide Version 1.0 Application – SMS The Message allows you to transmit and verify SMS text messages between one terminal and the other, when it is connected to SSCP. The messages can be sent to 9 recipients at same time. The received messages are kept as pop-up notice in the desktop area.
AP-IP300 IP Phone Installation Guide Version 1.0 [Table 4-40] Description of SMS Menu Screen Category Description Write Text Message Write SMS messages to be sent Received Message Store the SMS messages in the box which have been received Saved Message Save the message in the box which have been sent Sent Message Store the messages in the box which have been sent Write and Send SMS Category Description Enter the messages in this field.
AP-IP300 IP Phone Installation Guide Version 1.0 Application – Application Setup The Application Setup menu consists of Remote Broadcast, Chime and Client Information. To use Remote Broadcast, you need the AddPac Broadcasting Equipment (AP3120) and broadcasting management program (e-MBMS Server). To preview Client Information, you need to save the client information and interoperate with the server.
AP-IP300 IP Phone Installation Guide Version 1.
AP-IP300 IP Phone Installation Guide Version 1.0 Application - Application – Remote Broadcast The menu sets up e-MBMS Server address and Port, User ID, Password for the Remote Broadcast. The Remote Broacast can be used in the environment installed with the AddPac Broadcasting Equipment (AP3120) and Broadcasting Management Program (e-MBMS Server).
AP-IP300 IP Phone Installation Guide Version 1.0 Application - Application Setup – Chime Setup This menu sets up or cancels the Chime Bell for starting up the Remote Broadcast.
AP-IP300 IP Phone Installation Guide Version 1.0 Application - Application Setup – Client Info Setup When to take a call, this menu displays a clients information, so you can check the sender’s name, resident’s ID and home address. From Client Info Setup menu you can set up the IP, port, enabling viewing the client’s information, and Auto CRM pop-up.
AP-IP300 IP Phone Installation Guide Version 1.0 Application – Client Info When to take a call, this menu displays a clients information, so you can check the client’s name, resident’s ID and home address.
AP-IP300 IP Phone Installation Guide Version 1.0 Application – Remote Broadcast The Remote Broadcast Menu enables the user to check the broadcasting status of each terminal.
AP-IP300 IP Phone Installation Guide Version 1.0 System Setup Menu The System Setup Menu can set up the name and number to be displayed on the desktop area and disable or enable the speed dial number to send out a call.
AP-IP300 IP Phone Installation Guide Version 1.0 System Setup – User Information This menu sets up the name and number that the user wants on the desktop area. Even if the name and number have been set up, the name and number are displayed on the desktop area, which are taken from the IP-PBX.
AP-IP300 IP Phone Installation Guide Version 1.
AP-IP300 IP Phone Installation Guide Version 1.0 System Setup – Speed Dial Setup The Speed Dial Setup menu allows the user to place a call by pressing the speed dial number which has been assigned with the outgoing call number. In order to use this feature, you may enable the Speed Dial and the Speed Dial Number should be assigned to the Phonebook.
AP-IP300 IP Phone Installation Guide Version 1.0 System Setup – Start menu The default screen (Tree) and Speed Button Map can be used selectively. Instead of the default screen, the Speed Button key can be used on the upper left side of the keypad to change the desktop screen.
AP-IP300 IP Phone Installation Guide Version 1.0 Chapter 5. Testing Operation Booting Procedure and Operating Bases The things that you have to know, prior to turning on the power of AP-IP300, are the booting procedure. • AP-IP300 checks its basic operation of its interface, memory and CPU through a self-testing procedure • After the Boot Loader is started, the IP100 looks for the appropriate software image file.
AP-IP300 IP Phone Installation Guide Version 1.0 Using the Hyper-Terminal for the Console Terminal Emulator Application must be installed for using the PC for the console terminal. HyperTerminal Application is used for MS-Windows. (Figure 5-1) Terminal Emulator HyperTerminal of MS-Windows After HyperTerminal is performed, determine the name of the new connection. The user can decide the name of the connection.
AP-IP300 IP Phone Installation Guide Version 1.
AP-IP300 IP Phone Installation Guide Version 1.0 Select the interface of which the console cable is connected Since AP-IP300 does not support Console Interface, the IP Address of LAN1 interface is used to connect PC as it is shown in the following figure: (LAN1 default ip address : 192.168.10.1) Access after the IP address of 192.168.10.100 for the PC is set.
AP-IP300 IP Phone Installation Guide Version 1.0 After completing the setup, you can see the login screen of AP-IP300 in the following Figure (Figure 5-4) Login Screen You may see the 2 types of prompt: ‘AP-IP300>’ and ‘AP-IP300#’. The prompt with starting with ‘>’ means that the user, who logged in, has the least privilege of ‘admin’ only. He/she is not allowed to change the settings of the IP Phone. The prompt with ‘#’ means that the user, who logged in, had the privilege of ‘admin’.
AP-IP300 IP Phone Installation Guide Version 1.0 Using APOS Commands NOTE All the product lines of AddPac Technology are imbedded with APOS AddPac Operating System). Therefore, all the basic settings of CLI (Command Line Interface) are same.
AP-IP300 IP Phone Installation Guide Version 1.0 General User Mode Commands These are the functions that all the types of the users who logged in the system The prompt for the general user can be indicated as ‘IP-300>’.
AP-IP300 IP Phone Installation Guide Version 1.0 Management Mode Commands These are the types of commands that the administrator, whoever logged in the system, can use. To get into configuration of this system mode, the user must be logged in as an administrator. In this mode, the commands can be same as General User mode such as ‘show’, but more information can be shown depending on the option. The prompt of Management Mode can be indicates as ‘IP300#’.
AP-IP300 IP Phone Installation Guide Version 1.
AP-IP300 IP Phone Installation Guide Version 1.0 Basic Configuration Configuring Password After a connection is established to the console, the user can only have the basic show command. To gain more privilege to access, the user has to enter enable mode. When the general use enter enable mode, he/she gains the all the privilege to change the system configuration. Therefore it is important to set the password, so only the administrator can enter to configure the settings.
AP-IP300 IP Phone Installation Guide Version 1.
AP-IP300 IP Phone Installation Guide Version 1.0 Configuring FXS/FXO Port * Check show run first [Table 5-6] Configuring FXS/FXO Port IP300# show run Building configuration... Current configuration: version 8_42_003 hostname IP300 ! username root password router administrator ! interface Loopback0 ip address 127.0.0.1 255.0.0.0 ! interface FastEthernet0/0 ip address 172.17.201.88 255.255.0.0 ip nat outside speed auto no qos-control ! interface FastEthernet0/1 ip address 192.168.10.1 255.255.255.
AP-IP300 IP Phone Installation Guide Version 1.0 ! dial-peer voice 0 pots destination-pattern 1004 port 0/0 ! IP300# IP300# con t IP300(config)# dial-peer voice 1 pots => FXS/FXO port dial peer configuration IP300(config-dialpeer-pots-1)# destination-pattern 1014 Assigning the port numbers of FXS/FXO IP300(config-dialpeer-pots-1)# port 0/1 => Assigning the port that has been checked from FXS/FXO voice-port IP300# show run (checking the configuration) Building configuration...
AP-IP300 IP Phone Installation Guide Version 1.0 ! Voice port configuration. ! ! SPEECH voice-port 0/0 ! ! FXS voice-port 0/1 ! ! Pots peer configuration.
AP-IP300 IP Phone Installation Guide Version 1.0 Chapter 6. Emergency Recovery The entire AddPac VoiIP product line has 2 different zones. One is to store APOS and Boot Loader is the other. The functions of Boot Loader can be used in the followings: 1. Loss of the password for the root account 2. Damage or erase of the software in APOS image You can recover the Default IP by resetting APOS settings in case you lost or change the Default IP(192.168.10.1) AP-IP100 which can be accessed by TELNET, FTP.
AP-IP300 IP Phone Installation Guide Version 1.0 Entering the Boot Loader mode Since AP-IP100 does not have console interface, it is not possible to enter the mode of Boot Loader by using ‘ctrl+x’, ctrl+c’ , which is possible for APOS with presence of console such as ‘send break’., during the booting process. During the booting process, AP-IP100 checks the basic operation of CPU, memory and interface. Then it waits for about 3 seconds for the user to make an access.
AP-IP300 IP Phone Installation Guide Version 1.0 Initialize APOS Settings When the user lost the default IP address of the IP Phone (192.168.10.1) that enables TELNET and FTP access, after making a change, the default IP can be recovered by initializing APOS settings (Please be cautious when you initializes APOS configuration, all the existing settings of configuration are to be erased.) You can initialize APOS settings by TELNET access. D:\> D:\> telnet 192.168.10.1 Welcome, APOS™ Boot Kernal Version 5.
AP-IP300 IP Phone Installation Guide Version 1.0 Downloading APOS Image File in Boot Loader Mode The AddPac AP-IP100 IP Phone allows FTP access, which is supported by the binary code, to transmit APOS image file. APOS image of AP-IP100 can be downloaded from PC by using FTP. D:\ >dir 2006-05-15 05:21p
. 2006-05-15 05:21p .. 2006-05-15 05:21p 1,775,360 AP-IP100_g2_v8_41_015.bin D:\> D:\> ftp 172.17.201.88 Connected to 172.17.201.88. 220 IP100 FTP server (Version 8.41.015) ready.AP-IP300 IP Phone Installation Guide Version 1.0 Chapter 7. Appendix This Appendix provides information about the Pinout specifications of the following cables used with AP-IP200 IP Phone. z Console Port Signal and Pinout (RJ-45 to DB9) z Ethernet UTP Cable Assemble (RJ-45 to RJ-45) Pinout [RS-232C Console Port Signal & Pinout ] In order to connect RS-232C console port with the Terminal Emulating PC, the RJ-45 to DB9 (Female DTE Connector) cable is used.
AP-IP300 IP Phone Installation Guide Version 1.0 [UTP Cable (RJ-45 to RJ-45) Pinout Specification] In order to connect the LAN port of this equipment with other equipments (i.e. HUB), the RJ-45 to RJ-45 Ethernet Cable is used. The RJ-45 Connector Pin sequence is provided below and the signal and Pinout specifications are enlisted at the below table.
AP-IP300 IP Phone Installation Guide Version 1.0 Acronyms and Glossary Terms Definition & Description ADSL An acronym for Asymmetric Digital Subscriber Line, ADSL is a method of transmitting data over traditional copper telephone lines. Data can be downloaded at speeds of up to 1.544 Megabits per second and uploaded at speeds of 128 Kilobits per second (asymmetric). An acronym for VoIP Plug & Play Management Software.
AP-IP300 IP Phone Installation Guide Version 1.0 cable modem can be used to achieve more bandwidth. Cable network also requires modularization and demutualization process while sending the data. Call Center A call center is a central place where customer and other telephone calls are handled by an organization, usually with some amount of computer automation.
AP-IP300 IP Phone Installation Guide Version 1.0 of analog signal to bit stream with Pulse Code Modulation method. 2. DSP software algorithm for compressing/ decompressing voice or audio signal Console DTE interface whether the command is delivered to the host.
AP-IP300 IP Phone Installation Guide Version 1.0 distance of still pictures printed matter and similar documented material Frame data that is transmitted between network points as a unit complete with addressing and necessary protocol control information. A frame is usually transmitted serial bit by bit and contains a header field and a trailer field that "frame" the data. (Some control frames contain no data.) Frame-Relay Switching type Data Link Layer Protocol.
AP-IP300 IP Phone Installation Guide Version 1.0 startup and request admission to a call from the gatekeeper. H.225 An International Telecommunication Union (ITU-T) standard session control and packetization. for H.225.0 It defines various protocols of RAS, Q.931, RTP and etc. H.245 An International Telecommunication Union (ITU-T) standard for H.245 endpoint control. H.323 An International Telecommunication Union (ITU-T) standard that describes packet-based video, audio, and data conferencing.
AP-IP300 IP Phone Installation Guide Version 1.0 independently without having to coordinate with each other. ISP An ISP (Internet service provider) is a company that provides individuals and other companies access to the Internet and other related services such as Web site building and virtual hosting. An ISP has the equipment and the telecommunication line access required to have a point-of-presence on the Internet for the geographic area served.
AP-IP300 IP Phone Installation Guide Version 1.0 LANs but smaller than WANs. Compare with: LAN, WAN. MGCP MGCP, also known as H.248 and Megaco, is a standard protocol for handling the signaling and session management needed during a multimedia conference. The protocol defines a means of communication between a media gateway, which converts data from the format required for a circuit-switched network to that required for a packet-switched network and the media gateway controller.
AP-IP300 IP Phone Installation Guide Version 1.0 user's computer and the ISP using its own Link Control Protocol (LCP). PPP supports PAP, CHAP and other authentication protocols as well as compression and encryption. Protocol Stack Any set of communication protocols, such as TCP/IP, that consists of two or more layers of software and hardware.
AP-IP300 IP Phone Installation Guide Version 1.0 2. Rapid Transport Protocol. Provides pacing and error recovery for APPN data as it crosses the APPN network. With RTP, error recovery and flow control are done end-to-end rather than at every node. RTP prevents congestion rather than reacts to it. 3. Real-Time Transport Protocol. Commonly used with IP networks.
AP-IP300 IP Phone Installation Guide Version 1.0 related equipment capable of carrying a 1.544 Mbps DS-1 signal. Term often used interchangeably with DS-1. Refer to: AMI, B8ZS, DS-1. TCP/IP Transmission Control Protocol/Internet Protocol, The protocol suit developed by DoD (USA) in 1970s for the worldwide inter-network development. TCP & IP is the most well known protocols of the suite. Telco Refer to: IP, TCAP. Telephone Company, referring to the company offering telephone service to customers.
AP-IP300 IP Phone Installation Guide Version 1.0 telephony for a set of facilities for managing the delivery of voice information using the Internet Protocol (IP). In general, this means sending voice information in digital form in discrete packets rather than in the traditional circuit-committed protocols of the public switched telephone network (PSTN). A major advantage of VoIP and Internet telephony is that it avoids the tolls charged by ordinary telephone service.
AP-IP300 IP Phone Installation Guide Version 1.0 AddPac Technology Co., Ltd. 2F & 3F, Jeong-Am Bldg., 769-12 Yeoksamdong, Gangnam-gu, Seoul, 135-080, Korea Tel: +82 2 568 3848 Fax: +82 2 568 3847 Email: sales@addpac.com http:// www.addpac.
