Installation guide

AP-IP200 IP Phone Installation Guide (Release 1.00E) Aug. 2005
AddPac Technology Proprietary & Documentation 93 - 8
Getting Into AP-IP200 IP Phone Installation Guide
This chapter explains the AP-IP200 IP phone installation guide.
[Contents of AP-IP200 Installation Guide]
This guide assists users to install the AP-IP200 IP Phone easily. This guide is composed of
six chapters as following. If user has previous experience to use IP Phone, please refer to
the chapters user want to know directly. But, if user has no experience to use IP Phone, it is
highly recommended to thoroughly understand the manual before operation of this IP Phone
.
z
Chapter 1 『AP-IP200 overview 』provides an introduction to the hardware and
software features of AP-IP200 and technical specification.
z Chapter 2 『Before Installation 』explains the installation environment and cable
requirements along with recommendations for safe operation of the equipment.
z Chapter 3 『AP-IP200 Installation』 explains how to connect cables, audio devices
such as Headset, Earphone, MIC and basic installation information.
z Chapter 4 『 AP-IP200 UI Operating Guide 』 explains the AP-IP200 UI(User
Interface) operating guide using Keypad.
z Chapter 5 『 AP-IP200 Network Configuration 』 explains the detailed network
configuration through AP-IP200 CLI(command line interface) command (RS-232C).
z Chapter 6 『Appendix』provides the detailed LAN cable and RS-232C console
cable pin assignment specifications for AP-VP300 video phone and warranty.