Installation guide

AP-IP200 IP Phone Installation Guide (Release 1.00E) Aug. 2005
AddPac Technology Proprietary & Documentation 93 - 75
Ex1) Apple Input ⇒ “ 2 5time + 7 2 time + F2 + 7 2time + 5 4time + 3 3time “
Ex2) 2005/09/14 Input
⇒ “ 2 + 0 + F2 + 0 +5 + # 2 time + 0 + 9 + # 2time + 1 + 4
Ex3) 2aB Input ⇒ “ 2 + F2 + 2 2time + F2 + 2 6time”
Call/Cancel Button
This Call button is used for various call scenarios shown as Table 4-3.
.
[Table 4-3] Key PAD Call Button Usage
Call Button Usage Description
Recent Call
If user presses the Call button at idle mode, recent call history is listed. If user
presses the Call button once again after searching the recent call history, user
can dial-out the peer’s phone number.
Dial-Out
If user presses the Call button after inputting dial number at idle mode, AP-
IP200 starts dial-out signal to counter part user. Also, this Call button starts
the dial-out signal to remote peer in Speed-Dial and Recent Cal Menu.
Call Hook-off
When VoIP call is coming from remote user, if user presses the this Call
button, user can receive VoIP call via Speaker Phone function.
Confirm (OK)
If user want to apply after parameter setting in all Menu Tree, This Call button
is used as a OK button
This Cancel button is used for various call cancel /on-hook shown as Table 4-4.
[Table 4-4] Key PAD Cancel Button Usage
Cancel Button Usage Description
On-Hook
The Cancel button cancels the call at conversation mode.