Installation guide
AP-IP200 IP Phone Installation Guide (Release 1.00E) Aug. 2005
AddPac Technology Proprietary & Documentation 93 - 66
Network Setup– Service
This menu activates or deactivates FTP, TELNET, TFTP, SNMP protocol service of AP-
IP200.
3. Network
Setup
5.Service
FTP
Telnet
SNMP
Figure 4-34 Service Setup Menu
Service Setup Description
Actives/Deactivates the FTP service
protocol. Default is enable mode
(activating FTP service). Default port
number is 21.
Actives/Deactivates the TELNET service
protocol. Default is enable mode
(activating TELNET service). Default port
number is 23.