Installation guide

AP-IP200 IP Phone Installation Guide (Release 1.00E) Aug. 2005
AddPac Technology Proprietary & Documentation 93 - 50
If user wants to apply this input value In Menu after setting, user should press the OK button.
And if user wants to maintain the applied value after reboot, user should press the OK
button at ToolBox-SaveAll Menu.(refer to Tool Box Menu)
Internet– IPv6 Setting
Figure 4-21 IPv6 Setting Menu
IP version 6 setting Description
Getting a dynamic IPv6 address from
IPv6 server.
Set IP version6 address manually and
build WAN interface such as static IP
address E1/T1 leased line.
This EUI-64 IPv6 address scheme use
the Network ID(64bit) and Host ID(64bit).
User sets Network ID by KEY input.
System MAC address is used for 64bit