Installation guide

AP-IP200 IP Phone Installation Guide (Release 1.00E) Aug. 2005
AddPac Technology Proprietary & Documentation 93 - 28
Chapter 4. AP-IP200 UI Operating
Guide
AP-IP200 IP Phone Initial Information Display
If power-on booting procedure or warm start reset procedure is done, LCD panel of AP-
IP200 displays the message shown as figure 4-1. Table 4.1 explains what is the LCD display
message and upper, right side’s red color LED of AP-IP200 front side.
Figure 4-1 LCD Display Message AP-IP200 IP Phone
[Table 4-1] Upper LCD Panel’s LED and Message Display of AP-IP200 IP Phone
No. Description
①
Red color LED
LED ON: Hook Off (Handset Pickup, Speaker Phone Mode, and
Headset Mode) and Conversation Mode.
LED OFF : Idle state (On Hook)
LED Blinking: Red color LED is blinking at absence call. If User Hook-Off,
checks the absence call, LED blinking is disappear.
②
Date & Time Display the date & time of current. At conversation, display the real time
“connection time”.