Installation guide

AP-IP200 IP Phone Installation Guide (Release 1.00E) Aug. 2005
AddPac Technology Proprietary & Documentation 93 - 25
• AP-IP200 IP Phone’s Fast Ethernet PC Interface is supposed to be connected into
Desktop PC’s LAN Port with Direct-Through cable in IP-Share mode and to be
connected into HUB in NAT/PAT or Bridge mode.
• In case of connecting directly to Desktop PC’s LAN Port, please use Direct-Through
cable.
• In case of connecting directly to HUB, please use Cross-over cable.
Figure 3-2 LAN Interface Diagram of AP-IP200 IP Phone