Installation guide

AP-IP200 IP Phone Installation Guide (Release 1.00E) Aug. 2005
AddPac Technology Proprietary & Documentation 93 - 24
Chapter 3. AP-IP200 Installation
•
Connecting Ethernet Interface
• Connect AP-IP200’s LAN interface to LAN interface of WAN equipment (Router or
ADSL/Cable modem) with RJ45 UTP cable.
• There might be some cases of direct connection to router or modem with cross-over
cable.
• Please use direct-through cable to connect to HUB.
Figure 3-1 Network Interfaced Diagram of AP-IP200 IP Phone