Installation guide

AP-IP200 IP Phone Installation Guide (Release 1.00E) Aug. 2005
AddPac Technology Proprietary & Documentation 93 - 22
Prerequisites for AP-IP200 Installation
User should consider the EMI standards and distance limitations (EIA recommendation)
when installing the AP-IP200 IP Phone.
The following section describes the Ethernet cable and the RS-232C console cable AP-
IP200 supports.
Prerequisites for Installation
Unless a separate order is made, the tools and certain cables are not provided in the
package. Prepare the following equipments and tools before installation.
Cable for LAN and Console port connection
RJ-45 to RJ-45 cable for LAN port
RS-232C console cable with RJ-45 connector (included in equipment packing box)
Ethernet port
AP-IP200 IP Phone has two(2) RJ45 Fast Ethernet ports in rear side. In case that you want
to connect LAN using these ports, please use right cable and connector. See the cable
specification in Appendix for Ethernet cable pin specifications.
Console port
AP-VP200 IP Phone has one RJ-45 type RS-232C connector interface in rear side. It can be
used for AP-IP200 initial configuration, equipment monitoring and debugging. You must use
a cable and a connector. Refer to cable specification in Appendix on RS-232C console cable
pin specification
s.