Installation guide

AP-IP200 IP Phone Installation Guide (Release 1.00E) Aug. 2005
AddPac Technology Proprietary & Documentation 93 - 15
→ Spanning Tree Bridging Protocol Support
→ Remote Bridging Support
→ Concurrent Routing and Bridging Support
Cisco Style Command Line Interface(CLI)
Network time Protocol(NTP) Support
[Table 1-3] AP-IP200 Network Protocol Specification
Category S/W Specification
Basic Network
Protocols
ARP, IPv4, IPv6, TCP, UDP, ICMP, ICMPv6, SCTP, IGMP, MLD
IPv4 : Static
Routing Protocol
IPv6 : Static
FTP, Telnet, TFTP, DHCP Server/Relay, SNMP Server
CDP (Cisco Discovery Protocol)
DNS Resolver , DDNS(nsupdate)
Bridge
Syslog
IPv4/IPv6 policy control (QoS)
Service Protocol
VPDN (Virtual Private Dial-up Network : L2TP Server)
NAT/PAT for IPv4
IP connect (formerly ip-share) and device cascade for IPv4
IP/IP, IP/GRE tunneling
NAT-PT
IPv4/IPv6 Interworking
6 to 4, Autoconfig tunneling
Fixed (Static)
DHCP
IPv4 Address
Configuration
PPPoE
Fixed (Static)
EUI-64
IPv6 Address
Configuration
Autoconfig (Neighbor Advertisement and Solicitation)
Standard & Extended IPv4/IPv6 Access List
Multi-level User Account Management
IP accounting
Miscellaneous
fsh (Embedded file system shell)