Installation guide

AP-IP200 IP Phone Installation Guide (Release 1.00E) Aug. 2005
AddPac Technology Proprietary & Documentation 93 - 14
AP-IP200 IP Phone Software Specification
[Table 1-2] AP-IP200 S/W Specification
Category S/W Specification
LAN Protocol Static and IEEE 802.1Q VLAN Routing,
WAN Protocol Point-to-Point Protocol (PPPoE for ADSL), etc.
Voice Codec
- G.711, G.723.1, G.726, G.729, etc.
H.323, SIP, and MGCP Triple Concurrent Stack Support
ITU-T H.323 v3 VoIP Protocol with ITU-T H.235 Security Feature
Voice Processing Features Supports
- VAD, DTMF, CNG, G.168 and T.38 FAX Relay
ITU-T H.323 Gateway, Gatekeeper Support
Audio Service
& Signaling Protocol
Enhanced QoS Management Features for Voice Traffics
Standard SNMP Agent (MIB v2) Support
Traffic Queuing and Frame-Relay Flow Control
Remote Management using Console, Rlogin, Telnet
Network Management
Web based Managements using HTTP Server Interface
Standard & Extended IP Access List
Access Control and Data Protections
Enable/Disable for Specific Protocols
Multi-Level User Account Management
Auto-disconnect for Telnet/Console Sessions
Security Functions
PPP User Authentication Supports
→ Password Authentication Protocol(PAP)
→ Challenge Handshake Authentication Protocol (CHAP)
System Performance Analysis for Process, CPU, Connection I/F
Configuration Backup & Restore for APOS Managements
Debugging, System Auditing, and Diagnostics Support
System Booting and Auto-rebooting with Watchdog Feature
System Managements with Data Logging
Operation
&
Management
IP Traffic Statistics with Accounting
DHCP Server & Relay Functions
Network Address Translation (NAT) Function
Port Address Translation (PAT) Function
Other Scalability
Features
Transparent Bridging (IEEE Standard) Function