Installation guide

AP-IP200 IP Phone Installation Guide (Release 1.00E) Aug. 2005
AddPac Technology Proprietary & Documentation 93 - 13
AP-IP200 IP Phone Hardware Specification
[Table 1-1] AP-IP200 IP Phone HW Specification
Category Specification
Model AP-IP200
Product category IP Phone (Speaker Phone, Mute, Headset Interface)
Microprocessor High Performance RISC Microprocessor
Digit and KEY Button 3 x 4 Standard Button and 17 Menu/Function KEY
LCD Display Graphic LCD 2 Line Graphic LCD
System Memory 4MB Flash Memory Memory
Main Memory 16/32MB High Speed SDRAM
16M : APOS 1.0 Stack : IPv4 Support only
32M : APOS 2.0 Stack : IPv4/IPv6 Support
Audio Input 1-Port 3.5mm Male Stereo-In Audio Input for Mic, etc.
Audio Interface for
Headset
Audio Output 1-Port 3.5mm Male Stereo-Out Audio Output for
Earphone, etc.
PSTN Backup
(Option)
FXO VoIP Interface 1-Port RJ-11 Connector
LAN 0 Port for WAN 1-Port 10/100Mbps Fast Ethernet RJ-45 Connector
Ethernet Interface
LAN 1 Port for PC 1-Port 10/100Mbps Fast Ethernet RJ-45 Connector
Console Interface RS-232C Serial Port 1-Port RJ-45 Connector
External Power Supply External AC110~220V 50/60Hz, 5V, 2A Power SupplyPower Supply
Power over Ethernet(Option) PoE(Power over Ethernet) Support via LAN Port
Hardware Chassis Material ABS Material/Compact Phone Chassis