AP-IP200 IP Phone Installation Guide [Data, Voice, Video & IP Telephony Solution] August, 2005 AddPac Technology Co., Ltd. Technical Sales Division www.addpac.
AP-IP200 IP Phone Installation Guide (Release 1.00E) Aug. 2005 AP-IP200 IP Phone Note. The specifications and information in this guide are subject to change without notice. All statements, information, and recommendations in this guide are believed to be accurate but are presented without warranty of any kind, express or implied.
AP-IP200 IP Phone Installation Guide (Release 1.00E) Aug. 2005 [ Contents ] Getting Into AP-IP200 IP Phone Installation Guide ............................................................ 8 Chapter 1. AP-IP200 Overview .......................9 AP-IP200 IP Phone Hardware Specification ....................................................................... 9 AP-IP200 IP Phone Software Specification ......................................................................... 9 AP-IP200 IP Phone Front Part....
AP-IP200 IP Phone Installation Guide (Release 1.00E) Aug. 2005 IPv4 Setting– Static IP............................................................................................................ 9 IPv4 Setting– PPPoE ............................................................................................................... 9 Internet– IPv6 Setting ............................................................................................................ 9 IPv6 Setting– Auto Configuration.............
AP-IP200 IP Phone Installation Guide (Release 1.00E) Aug. 2005 [Figure List] Figure 1-1 AP-IP200 IP Phone Network Diagram...................................................................9 Figure 1-2 AP-IP200 Front Part KEY arrangement diagram .................................................9 Figure 1-3 AP-IP200 Rear Part Connector Diagram .............................................................9 Figure 3-1 Network Interfaced Diagram of AP-IP200 IP Phone ..........................................
AP-IP200 IP Phone Installation Guide (Release 1.00E) Aug. 2005 Figure 4-30 QoS Setting Menu .................................................................................................9 Figure 4-31 SIP Options Setting Menu .....................................................................................9 Figure 4-32 PSTN Prefix Menu ...................................................................................................9 Figure 4-33 Phone Number Setting Menu............................
AP-IP200 IP Phone Installation Guide (Release 1.00E) Aug. 2005 [Table List ] [Table 1-1] AP-IP200 IP Phone HW Specification ..................................................................9 [Table 1-2] AP-IP200 S/W Specification ..................................................................................9 [Table 1-3] AP-IP200 Network Protocol Specification ..........................................................9 [Table 1-4] The KEY button’s role of AP-IP200 IP Phone Front Part..................
AP-IP200 IP Phone Installation Guide (Release 1.00E) Aug. 2005 Getting Into AP-IP200 IP Phone Installation Guide This chapter explains the AP-IP200 IP phone installation guide. [Contents of AP-IP200 Installation Guide] This guide assists users to install the AP-IP200 IP Phone easily. This guide is composed of six chapters as following. If user has previous experience to use IP Phone, please refer to the chapters user want to know directly.
AP-IP200 IP Phone Installation Guide (Release 1.00E) Aug. 2005 For technical support about AP-IP200 IP Phone, contact the sales department of AddPac Technology Co. Ltd. AddPac Technology Co., Ltd. 2nd Fl. Jeong-Am Building, 769-12 Yeoksam-Dong, Kangnam-Ku, Seoul , Korea Phone (02) 568-3848 Fax (02) 568-3847 E-mail : info@addpac.com http://www.addpac.com The revision history of AP-IP200 IP Phone installation guide is as follows.
AP-IP200 IP Phone Installation Guide (Release 1.00E) Aug. 2005 Chapter 1. AP-IP200 Overview AP-IP200 IP phone is designed to provide enhanced IP telephony functionality to meet the wide range of business user requirements. This IP telephone optimally delivers rich featured voice telephony service on ordinary internet infrastructure as well as AddPac IP-PBX environment on local LAN as a fully featured IP extension for the complete AddPac VoIP solution.
AP-IP200 IP Phone Installation Guide (Release 1.00E) Aug. 2005 AP-IP200 delivers not only fully featured IP telephony services, but also various supplementary services to users. It features advanced phone directory, voice mail, CID(Caller ID), call transfer on site or at a remote site. One of its greatest services is IP broadcasting feature which enables AP-IP200 to offer voice broadcasting service, incorporated with in-house broadcasting system.
AP-IP200 IP Phone Installation Guide (Release 1.00E) Aug.
AP-IP200 IP Phone Installation Guide (Release 1.00E) Aug.
AP-IP200 IP Phone Installation Guide (Release 1.00E) Aug. 2005 AP-IP200 IP Phone Software Specification [Table 1-2] AP-IP200 S/W Specification Category S/W Specification LAN Protocol Static and IEEE 802.1Q VLAN Routing, WAN Protocol Point-to-Point Protocol (PPPoE for ADSL), etc. Audio Service Voice Codec & Signaling Protocol - G.711, G.723.1, G.726, G.729, etc. H.323, SIP, and MGCP Triple Concurrent Stack Support ITU-T H.323 v3 VoIP Protocol with ITU-T H.
AP-IP200 IP Phone Installation Guide (Release 1.00E) Aug.
AP-IP200 IP Phone Installation Guide (Release 1.00E) Aug.
AP-IP200 IP Phone Installation Guide (Release 1.00E) Aug. 2005 AP-IP200 IP Phone Front Part This chapter explains the front part’s DIAL and FUNCTION KEY of AP-IP200 IP Phone. AP-IP200 IP Phone’s external CASE is made of high degree of solidity ABS. Main key buttons are equipped on front part so that user can operate all the functions with these buttons. The headset interface such as Mic Jack., Ear phone Jack is located at lower left side of AP-IP200.
AP-IP200 IP Phone Installation Guide (Release 1.00E) Aug. 2005 Following Table 1-4 explains the KEY button’s role of AP-IP200 front side each. [Table 1-4] The KEY button’s role of AP-IP200 IP Phone Front Part No. KEY button Function (1) F1~F4 Function key for AP-IP200 UI(User Interface) on Compact LCD Example F1: Backspace KEY, F2: Space KEY at Edit Mode in Phonebook, Speed Dial UI. Used at HookFlash button for call transfer at conversation.
AP-IP200 IP Phone Installation Guide (Release 1.00E) Aug. 2005 AP-IP200 IP Phone Rear Part Rear part consists of FXO PSTN backup interface, Handset connector interface, RS-232C RJ45 interface for Command Line Interface, power switch and connector including two (2) Fast Ethernet for WAN/LAN interfaces. Figure 1-3 AP-IP200 Rear Part Connector Diagram Table 1-5 explains the AP-IP200 rear part connector interface. [Table 1-5] AP-IP200 IP Phone Rear Part Interface No.
AP-IP200 IP Phone Installation Guide (Release 1.00E) Chapter 2. Aug. 2005 Before Installation Installation Requirement The followings are the recommendation for safe operation of the equipment. z Ensure AP-IP200 IP Phone is in a dust-free environment before and after installation. z Ensure AP-IP200 IP Phone upper part is empty on a flat and safe surface. z To prevent accidents, avoid ties, scarf, sleeves, and any other loose clothing from entangling with the chassis.
AP-IP200 IP Phone Installation Guide (Release 1.00E) Aug. 2005 General Requirement The AP-IP200 IP Phone is ready for use where electronic products are used. However, locations with the following conditions are recommended for maximum performance. z A level and well ventilated location is recommended. z Secure the equipment safely where intended to install. z Avoid placing objects on top of the equipment. z Install the equipment in a cool location avoiding direct sunlight.
AP-IP200 IP Phone Installation Guide (Release 1.00E) Aug. 2005 Prerequisites for AP-IP200 Installation User should consider the EMI standards and distance limitations (EIA recommendation) when installing the AP-IP200 IP Phone. The following section describes the Ethernet cable and the RS-232C console cable APIP200 supports. Prerequisites for Installation Unless a separate order is made, the tools and certain cables are not provided in the package.
AP-IP200 IP Phone Installation Guide (Release 1.00E) Aug. 2005 Unpacking Before unpacking, check for external damage of the packaging box.
AP-IP200 IP Phone Installation Guide (Release 1.00E) Aug. 2005 Chapter 3. AP-IP200 Installation • Connecting Ethernet Interface • Connect AP-IP200’s LAN interface to LAN interface of WAN equipment (Router or ADSL/Cable modem) with RJ45 UTP cable. • There might be some cases of direct connection to router or modem with cross-over cable. • Please use direct-through cable to connect to HUB.
AP-IP200 IP Phone Installation Guide (Release 1.00E) Aug. 2005 • AP-IP200 IP Phone’s Fast Ethernet PC Interface is supposed to be connected into Desktop PC’s LAN Port with Direct-Through cable in IP-Share mode and to be connected into HUB in NAT/PAT or Bridge mode. • In case of connecting directly to Desktop PC’s LAN Port, please use Direct-Through cable. • In case of connecting directly to HUB, please use Cross-over cable.
AP-IP200 IP Phone Installation Guide (Release 1.00E) Aug. 2005 Connecting PSTN (FXO) interface The FXO PSTN interface port is available when PSTN access-line is used or impossible to make a VoIP call due to network problem. PSTN backup is implemented by connecting PSTN access-line to PSTN port, illustrated as following figure.
AP-IP200 IP Phone Installation Guide (Release 1.00E) Aug. 2005 Connecting Audio-In/Out Interface for Headset Audio-In/Out port located at left side of AP-IP200 IP Phone is for audio devices such as MIC, Speaker System or Headset Device etc. Connect this port to MIC system or External Speaker System using ‘3.5mm stereo jack’ cable.
AP-IP200 IP Phone Installation Guide (Release 1.00E) Aug. 2005 Chapter 4. AP-IP200 UI Operating Guide AP-IP200 IP Phone Initial Information Display If power-on booting procedure or warm start reset procedure is done, LCD panel of APIP200 displays the message shown as figure 4-1. Table 4.1 explains what is the LCD display message and upper, right side’s red color LED of AP-IP200 front side.
AP-IP200 IP Phone Installation Guide (Release 1.00E) Display Name ③ Aug. 2005 Display the Nick Name of this device. Change the Nick Name using following UI menu setting (System Setup -> 1.
AP-IP200 IP Phone Installation Guide (Release 1.00E) Aug. 2005 PhoneBook Menu . Phone Book is a phone number directory in which user can search by name and number, register phone number. It also has call log and speed dial menu.
AP-IP200 IP Phone Installation Guide (Release 1.00E) Phonebook Aug. 2005 – Search by Name Search phone number using name registered in Phone Book. User can find right number by inputting name with KEY button and make a VoIP call by pushing call button. Phonebook – Search by Dial Number Search phone number throughout Phone Book. User can input telephone number using KEY button, search right person and make a VoIP call by pushing call button. 1. Phone Book 1.
AP-IP200 IP Phone Installation Guide (Release 1.00E) Aug. 2005 matched user name is displayed on LCD and then user can subsequently input the second letter for search. Besides, user can make a call or modify information using selected person’s information. A LCD display message when user select Main >> Phone Book >> Number. Number menu has search function to search throughout number PhoneBook before.
AP-IP200 IP Phone Installation Guide (Release 1.00E) Aug. 2005 Figure 4-5 Phonebook Registration Menu Phonebook Registration Menu Description Indicates index number of phone number in Phone Book. This index number is for sorting in Speed Dial Index list.
AP-IP200 IP Phone Installation Guide (Release 1.00E) Aug. 2005 Input peer’s name for registering in Phonebook Input peer’s dial number for registering in Phonebook. Input peer’s IP address for registering in Phonebook * If user wants to apply the registered value In Menu, user should press the OK button. And if user wants to maintain the applied value after reboot, user should press the OK button at ToolBox-SaveAll Menu.
AP-IP200 IP Phone Installation Guide (Release 1.00E) Aug. 2005 Dial-Out Figure 4-6 Phonebook Speed Dial Menu Phone book Speed Dial Display the index number in Phonebook ① Display the name in Phonebook ② Display the Dial number in Phonebook ③ Phonebook Description – Recent Call Recent Call Menu shows recent call log. Call record provides number, name, and IP address of counter parties. It’s possible for user to make a VoIP call by OK call button.
AP-IP200 IP Phone Installation Guide (Release 1.00E) Aug.
AP-IP200 IP Phone Installation Guide (Release 1.00E) Aug.
AP-IP200 IP Phone Installation Guide (Release 1.00E) Aug. 2005 ToolBox Menu Tool Box menu consists of date/time setting, configuration saving, initialization for factory default mode and language selection.
AP-IP200 IP Phone Installation Guide (Release 1.00E) ToolBox Aug. 2005 – date & time Figure 4-11 Data/Time ToolBox Menu Date/Time ToolBox Menu Description Input and modify Year setting of APIP200. Input and modify Month setting of APIP200. Input and modify Day setting of AP-IP200. Input and modify Hour setting of APIP200. Input and modify Minute setting of APIP200. Input and modify Second setting of APIP200.
AP-IP200 IP Phone Installation Guide (Release 1.00E) Aug. 2005 data/time is saved) ToolBox -Language 2.Tool Box 2.
AP-IP200 IP Phone Installation Guide (Release 1.00E) ToolBox Aug. 2005 – Factory Default Mode Initialization Factory Default mode initialization feature deletes all the configuration of AP-IP200 and all the content on phone book and recent call menu. This command reboots the system automatically. This command is not recommended to use except in inevitable case.
AP-IP200 IP Phone Installation Guide (Release 1.00E) Aug. 2005 Tool Box– Save All This UI menu is for saving values which user inputs in UI. Once being saved, values are preserved even after rebooting.
AP-IP200 IP Phone Installation Guide (Release 1.00E) Aug. 2005 Network Setup Menu The network setup of AP-IP200 consists of WAN, LAN interface setting, SIP/H.323 signaling, FTP service, QoS for guaranteeing VoIP quality, call options etc. User should know this network setup menu for efficient usage of AP-IP200. This menu cannot be skipped for optimized environment.
AP-IP200 IP Phone Installation Guide (Release 1.00E) Network Setup Aug. 2005 – Internet Internet Menu has functions in relevance to AP-IP200’s fast ethernet LAN interface for Internet connection. As there are various network environments, user has to configure pursuant to his or her own network environment. WAN protocols supported by AP-IP200 are DHCP, static IPv4, PPPoE, and IPv6 etc. Following figure shows the UI command tree structure in Network Setup Menu. 3.
AP-IP200 IP Phone Installation Guide (Release 1.00E) Internet Aug. 2005 – IPv4 Setting Figure 4-17 IPv4 protocol setting Menu IPv4 protocol setting menu Description Getting a dynamic IP address from DHCP server such as cable modem, VDSL, IPADSL. Set IP address manually and build WAN interface such as static IP ADSL, E1/T1 leased line. Getting a dynamic IP address from PPP server such as ADSL.
AP-IP200 IP Phone Installation Guide (Release 1.00E) Aug. 2005 – DHCP IPv4 Setting If user enables DHCP protocol in network setup internet menu, user gets a dynamic IP address from DHCP server such as cable modem, VDSL, IP-ADSL.
AP-IP200 IP Phone Installation Guide (Release 1.00E) Aug. 2005 – Static IP IPv4 Setting If user wants to use static IP address, this menu helps to set a static IPv4 address manually and build WAN interface such as static IP ADSL, E1/T1 leased line, Metro ethernet, ATM, etc. Figure 4-19 Static IP Address Setting Menu Static IP Address Setting Description IP Address Setting Ex> 172.20.1.100 Network Mask Setting Ex> 255.255.0.0 Default Router Setting Ex> 172.20.1.
AP-IP200 IP Phone Installation Guide (Release 1.00E) Aug. 2005 First DNS setting (this menu can be applied at IPv6 mode) Ex> 168.126.63.1 Second DNS Setting (Option) (this menu can be applied at IPv6 mode) Ex> 168.126.63.1 If user wants to apply this input value In Menu after setting, user should press the OK button. And if user wants to maintain the applied value after reboot, user should press the OK button at ToolBox-SaveAll Menu.
AP-IP200 IP Phone Installation Guide (Release 1.00E) Aug. 2005 – PPPoE IPv4 Setting If user wants to get a dynamic IP address from PPP server, user enables the PPPoE protocol in IPv4 internet protocol setting menu to get a dynamic IP address from PPP server such as ADSL, etc. Figure 4-20 PPPoE Setting Menu PPPoE Parameter Setting Description Input User Name Ex> Addpac Input User Password Ex> 1234 Input Auth. Method “PAP/CHAP” using Alphanumeric KEY.
AP-IP200 IP Phone Installation Guide (Release 1.00E) Aug. 2005 If user wants to apply this input value In Menu after setting, user should press the OK button. And if user wants to maintain the applied value after reboot, user should press the OK button at ToolBox-SaveAll Menu.(refer to Tool Box Menu) Internet– IPv6 Setting Figure 4-21 IPv6 Setting Menu IP version 6 setting Description Getting a dynamic IPv6 address from IPv6 server.
AP-IP200 IP Phone Installation Guide (Release 1.00E) Aug. 2005 Host ID. IPv6 Setting– Auto Configuration This auto configuration mode enables to get a dynamic IPv6 address from IPv6 server.
AP-IP200 IP Phone Installation Guide (Release 1.00E) Aug. 2005 – Static IPv6 Address IPv6 Setting If user wants to use static IP version 6 address, this menu helps to set a static IP version 6 address manually and build WAN interface such as static IPv6 E1/T1 leased line, etc.
AP-IP200 IP Phone Installation Guide (Release 1.00E) Aug. 2005 Input second DNS server address Ex> 2001:230:20c:20::2 – EUI-64 IPv6 IPv6 Setting This EUI-64 IPv6 address scheme use the address combination of Network ID(64bit) and Host ID(64bit). User sets Network ID by KEY input. System MAC address is used for 64bit Host ID.
AP-IP200 IP Phone Installation Guide (Release 1.00E) Aug. 2005 Input First DNS Server Address Ex> 2001:230:20c:20::1 Ex> 168.126.63.1 Input Second DNS Server Address (Option) Ex> 2001:230:20c:20::2 Network Setup – LAN This LAN menu is used for protocol setting of AP-IP200 second LAN interface which is used to connect PC or Ethernet Hub. None, DHCP for single (1) PC, DHCP for multiple PC are available as protocols for second fast ethernet LAN port.
AP-IP200 IP Phone Installation Guide (Release 1.00E) LAN Setup Menu Aug. 2005 Description Disable the LAN Setup function (If select, use OK button) In DHCP protocol mode for single PC, for sharing public same IP address of APIP200’s WAN interface and LAN interface connected to PC, AddPac proprietary public IP-Share mechanism is used DHCP for multiple PC are similar to general IP sharer which links two (2) PCs or more.
AP-IP200 IP Phone Installation Guide (Release 1.00E) Network Setup Aug. 2005 – VoIP This VoIP setup menu is used for SIP/H.323 VoIP signaling interworking parameter setting between SIP server, Gatekeeper and AP-IP200 IP Phone. Following figure shows the UI menu tree structure for VoIP parameter setup. 3.Network Setup 3.Voip Setup Signaling Setup SIP Protocol SIP Server1 SIP Server2 Register e.165 On/Off H.
AP-IP200 IP Phone Installation Guide (Release 1.00E) Aug. 2005 – Signaling Setup VoIP Setting This menu is used for VoIP signaling setup such as H.323, SIP protocol Figure 4-26 VoIP Signaling Setup Menu VoIP Signaling Setup Description SIP parameter setup menu for SIP proxy server interworking H.323 parameter setup menu for H.323 Gatekeeper interworking Select one among SIP or H.
AP-IP200 IP Phone Installation Guide (Release 1.00E) Aug. 2005 – SIP Protocol Signaling Setup Figure 4-27 SIP Protocol Parameter Setup Menu SIP Protocol Parameter Description Input username for SIP server registration Input user password for SIP server registration. Input primary server IP address or domain of SIP server. Input secondary server IP address or domain of SIP server.
AP-IP200 IP Phone Installation Guide (Release 1.00E) Aug. 2005 Select ON/OFF mode whether E.164 address is registered in SIP server or not – H.323 Protocol Signaling Setup Figure 4-28 H.323 Protocol Setup Menu H.323 Protocol Setup Description Input H.323 ID for Gatekeeper registration Input H.323 password for Gatekeeper registration, if authentication is needed.
AP-IP200 IP Phone Installation Guide (Release 1.00E) Aug. 2005 Input secondary Gatekeeper IP address Select ON/OFF whether registered in Gatekeeper or not. (ON / OFF ) Signaling Setup– Select Signaling This menu is used for selecting one VoIP signaling among SIP / H.323 Protocol.
AP-IP200 IP Phone Installation Guide (Release 1.00E) Aug. 2005 using upper and lower KEY) H.323 Protocol choice (Pressed the OK button after moving using upper and lower KEY) VoIP Setup – QoS AP-IP200 transfers compressed VoIP data such as G.729, G.711 voice packet. Network condition like jitter, packet loss considerably affects high quality voice stream like G.711. Sometimes, it can be a major reason of voice quality degradation problems.
AP-IP200 IP Phone Installation Guide (Release 1.00E) Aug. 2005 QoS function is for WAN interface and cannot be applied to LAN interface. Range of value covers 48Kbps~4Mbps – VoIP Setup SIP Options This menu is for additional functions and options of SIP protocol. The SIP options are to be updated continuously. Figure 4-31 SIP Options Setting Menu SIP Options Description Select the call-transfer mode. basic/attend.
AP-IP200 IP Phone Installation Guide (Release 1.00E) Aug. 2005 Enter VoIP Tag for conference service Enter conference service name Enter firewall address to check the public IP address when AP-IP200 is used under NAT/Firewall network environment. Transfer RTP Session information to listen Inband Ringbacktone of Public network under NAT/Firewall environment. Set Session Timer SIP UA Retry Counter sets SIP INVITE retransmission count when AP-IP200 is dialout.
AP-IP200 IP Phone Installation Guide (Release 1.00E) Aug. 2005 Set the DNS SRV. When user-name is not number but characters, this option is used to register SIP server. VoIP Setup – PSTN Prefix When user wants to access the FXO interface for PSTN backup, this prefix number is used as PSTN access code. Additionally, AP-IP200 IP phone supports the PSTN back-up service when VoIP service is impossible due to network failure or VoIP call service is interrupted by exception.
AP-IP200 IP Phone Installation Guide (Release 1.00E) Aug. 2005 PSTN prefix number is an access code for PSTN FXO interface, default value is #. VoIP Setup – Phone Number This menu is used for E.164 AP-IP200 Number Assignment. Figure 4-33 Phone Number Setting Menu Phone Number Setup Description Enter the E.164 Phone Number.
AP-IP200 IP Phone Installation Guide (Release 1.00E) Network Setup Aug. 2005 – Service This menu activates or deactivates FTP, TELNET, TFTP, SNMP protocol service of APIP200. 3. Network Setup 5.Service FTP Telnet SNMP Figure 4-34 Service Setup Menu Service Setup Description Actives/Deactivates the protocol. is Default FTP enable service mode (activating FTP service). Default port number is 21. Actives/Deactivates the TELNET service protocol.
AP-IP200 IP Phone Installation Guide (Release 1.00E) Aug. 2005 Actives/Deactivates the SNMP service protocol. Default is enable mode (activating SNMP service).
AP-IP200 IP Phone Installation Guide (Release 1.00E) Aug. 2005 System Setup Menu The system setup includes the Display Name, Ring volume control, input/output volume control.
AP-IP200 IP Phone Installation Guide (Release 1.00E) System Setup Aug. 2005 – Display Name This is Name displayed on LCD panel. Default name is AP-IP200. If user wants to change default name, change or modify the default name at Display Name in System Setup Menu. Figure 4-37 Display Name Menu Display Name Description. Enter the Name you want (ex: Phone number, room number, office name).
AP-IP200 IP Phone Installation Guide (Release 1.00E) System Setup Aug. 2005 – Volume Control This volume menu controls the Ring volume, Input/Output volume (Speaker volume, Handset volume) of AP-IP200 IP Phone. 5. System Setup 2. Volume Setup Ring Volume Input Volume Output Volume Figure 4-38 Volume control Menu Volume Control Description Select the ring volume of internal speaker. Default ring volume level is 4. Select the input volume of Speaker Phone or Handset MIC.
AP-IP200 IP Phone Installation Guide (Release 1.00E) Aug. 2005 AP-IP200 IP Phone User Interface Menu Tree If user presses the MENU button, user can see the all MENU tree shown as Figure 4-39. Also, user uses the MENU KEY at conversation mode. 1. Phone Book 2.Tool Box 1. Date/Time 1. Search Name Number 2. Register Speed Dial ID Name 2. Select Language Korean * English 3. Factory Default 4. Save All Number IP 3. Speed Dial 4. Recent Call 5.
AP-IP200 IP Phone Installation Guide (Release 1.00E) AddPac Technology Proprietary & Documentation Aug.
AP-IP200 IP Phone Installation Guide (Release 1.00E) Aug.
AP-IP200 IP Phone Installation Guide (Release 1.00E) Aug. 2005 KEY Input Method This parts explains the KEY input method and available characters used in AP-IP200 Figure 4-40 KEY PAD Diagram [Table 4-2] Available Characters and KEY Input Procedures KEYs 1 Characters 1 < > & ( ) Description If pressed continuously, displayed character is changed.
AP-IP200 IP Phone Installation Guide (Release 1.00E) Aug. 2005 Ex1) Apple Input ⇒ “ 2 5time + 7 2 time + F2 + 7 2time + 5 4time + 3 3time “ Ex2) 2005/09/14 Input ⇒ “ 2 + 0 + F2 + 0 +5 + # 2 time + 0 + 9 + # 2time + 1 + 4 Ex3) 2aB Input ⇒ “ 2 + F2 + 2 2time + F2 + 2 6time” Call/Cancel Button This Call button is used for various call scenarios shown as Table 4-3. .
AP-IP200 IP Phone Installation Guide (Release 1.00E) Aug. 2005 While the VoIP call is proceeding using Call button, if user presses the Call Cancel Cancel Button, Dial-out Call proceeding is cancelled. Menu Tree level change If user presses the Cancel button in UI menu tree, Menu tree is (Move to One(1) Upper changed from current level to one (1) upper level.
AP-IP200 IP Phone Installation Guide (Release 1.00E) Aug. 2005 Chapter 5. AP-IP200 Network Configuration Basic CLI Command for Network Setup * CLI command for current network status IP200# show run Building configuration... Current configuration: ! hostname IP200 ! username root password router administrator ! ! interface Loopback0 ip address 127.0.0.1 255.0.0.0 ! interface FastEthernet0/0 ip address 172.20.103.100 255.255.0.
AP-IP200 IP Phone Installation Guide (Release 1.00E) Aug. 2005 * IP address and default router setting IP200# configure terminal IP200(config)# IP200(config)# interface FastEthernet 0/0 → Fast ethernet Interface IP200(config-if)# ip address 172.20.103.1 255.255.0.0 0 Port → IP address setting IP200(config-if)# VOIP_INTERFACE_DOWN VOIP_INTERFACE_DOWN VOIP_INTERFACE_UP : (172.20.103.1) IP200(config-if)# exit IP200(config)# IP200(config)# ip route 0.0.0.0 0.0.0.0 172.20.1.
AP-IP200 IP Phone Installation Guide (Release 1.00E) Aug. 2005 Chapter 6. Appendix This Appendix provides information about the Pinout specifications of the following cables used with AP-IP200 IP Phone. z Console Port Signal and Pinout (RJ-45 to DB9) z Ethernet UTP Cable Assemble (RJ-45 to RJ-45) Pinout [RS-232C Console Port Signal & Pinout ] In order to connect RS-232C console port with the Terminal Emulating PC, the RJ-45 to DB9 (Female DTE Connector) cable is used.
AP-IP200 IP Phone Installation Guide (Release 1.00E) Aug. 2005 [UTP Cable (RJ-45 to RJ-45) Pinout Specification] In order to connect the LAN port of this equipment with other equipments (i.e. HUB), the RJ45 to RJ-45 Ethernet Cable is used. The RJ-45 Connector Pin sequence is provided below and the signal and Pinout specifications are enlisted at the below table.
AP-IP200 IP Phone Installation Guide (Release 1.00E) Aug. 2005 Glossary Terms Definition & Description ADSL An acronym for Asymmetric Digital Subscriber Line, ADSL is a method of transmitting data over traditional copper telephone lines. Data can be downloaded at speeds of up to 1.544 Megabits per second and uploaded at speeds of 128 Kilobits per second (asymmetric). An acronym for VoIP Plug & Play Management Software.
AP-IP200 IP Phone Installation Guide (Release 1.00E) Cable Modem Aug. 2005 A modem designed to operate over cable TV lines. Because the coaxial cable used by cable TV provides much greater bandwidth than telephone lines, a cable modem can be used to achieve more bandwidth. Cable network also requires modularization and demutualization process while sending the data.
AP-IP200 IP Phone Installation Guide (Release 1.00E) Aug. 2005 75Ω cable for analog signal process and high speed digital signal process. CODEC An acronym for COder-DECoder 1. Built-in circuit device for coding/decoding of analog signal to bit stream with Pulse Code Modulation method. 2. DSP software algorithm for compressing/ decompressing voice or audio signal Console DTE interface whether the command is delivered to the host.
AP-IP200 IP Phone Installation Guide (Release 1.00E) Aug. 2005 the document and the resulting bit stream is then sent to the receiving machine via telephone line. The transmission and the reproduction at a distance of still pictures printed matter and similar documented material Frame data that is transmitted between network points as a unit complete with addressing and necessary protocol control information.
AP-IP200 IP Phone Installation Guide (Release 1.00E) Aug. 2005 management and locating gateways. A gatekeeper maintains a registry of devices in the multimedia network. The devices register with the gatekeeper at startup and request admission to a call from the gatekeeper. H.225 An International Telecommunication Union (ITU-T) standard session control and packetization. for H.225.0 It defines various protocols of RAS, Q.931, RTP and etc. H.
AP-IP200 IP Phone Installation Guide (Release 1.00E) Aug. 2005 nodes with either IPv4 or IPv6 can handle packets formatted for either level of the Internet Protocol. Users and service providers can update to IPv6 independently without having to coordinate with each other. ISP An ISP (Internet service provider) is a company that provides individuals and other companies access to the Internet and other related services such as Web site building and virtual hosting.
AP-IP200 IP Phone Installation Guide (Release 1.00E) Aug. 2005 physical address. Compare with network address. A data network designed for a town or city. MANs are considered larger than MAN LANs but smaller than WANs. Compare with: LAN, WAN. MGCP, also known as H.248 and Megaco, is a standard protocol for handling MGCP the signaling and session management needed during a multimedia conference.
AP-IP200 IP Phone Installation Guide (Release 1.00E) Aug. 2005 between the user and the ISP. Developed in 1994 by the IETF and superseding the SLIP protocol, PPP establishes the session between the user's computer and the ISP using its own Link Control Protocol (LCP). PPP supports PAP, CHAP and other authentication protocols as well as compression and encryption. Protocol Stack Any set of communication protocols, such as TCP/IP, that consists of two or more layers of software and hardware.
AP-IP200 IP Phone Installation Guide (Release 1.00E) Aug. 2005 network topology, and aids VINES servers in finding neighboring clients, servers, and routers. Uses delay as a routing metric. Refer to: SRTP. 2. Rapid Transport Protocol. Provides pacing and error recovery for APPN data as it crosses the APPN network. With RTP, error recovery and flow control are done end-to-end rather than at every node. RTP prevents congestion rather than reacts to it. 3. Real-Time Transport Protocol.
AP-IP200 IP Phone Installation Guide (Release 1.00E) Aug. 2005 collection, performance, and security. Refer to: SGMP, SNMP2. T1 A TDM physical transmission standard consisting of two twisted wire pairs and related equipment capable of carrying a 1.544 Mbps DS-1 signal. Term often used interchangeably with DS-1. Refer to: AMI, B8ZS, DS-1. TCP/IP Transmission Control Protocol/Internet Protocol, The protocol suit developed by DoD (USA) in 1970s for the worldwide inter-network development.
AP-IP200 IP Phone Installation Guide (Release 1.00E) Aug. 2005 a serial line. VoIP VoIP (Voice delivered using the Internet Protocol) is a term used in IP telephony for a set of facilities for managing the delivery of voice information using the Internet Protocol (IP). In general, this means sending voice information in digital form in discrete packets rather than in the traditional circuit-committed protocols of the public switched telephone network (PSTN).
AP-IP200 IP Phone Installation Guide (Release 1.00E) Aug. 2005 AddPac Technology Co., Ltd. 2F & 3F, Jeong-Am Bldg., 769-12 Yeoksamdong, Gangnam-gu, Seoul, 135-080, Korea Tel: +82 2 568 3848 Fax: +82 2 568 3847 Email: sales@addpac.com http:// www.addpac.
AP-IP200 IP Phone Installation Guide (Release 1.00E) AddPac Technology Proprietary & Documentation Aug.
