Installation guide

AP-IP120 IP Phone Installation Guide Version 1.0
AddPac Technology Proprietary & Documentation
34
may wait 2 seconds to enter the second character after entering the first one.
Ex1) Enter ‘Apple’
Step1
Press 2 button five times then press 7 button twice
Step 2 Hit F2 key then press 7 button twice
Step 3 Press 5 button four times then press 3 button three times “
Ex2) Enter ‘2005/09/14’
⇒ Press the buttons in the order 2, 0, F2, 0, 5, # twice, 0, 9, # twice, 1, 4
Ex3) Enter ‘2aB’⇒ 2 , F2 , 2 twice, F2 , 2 six times
Using Call/Cancel Button on the Keypad
The functions of Call button is described in [Table 3-2].
(Figure 3-7) Call Button on the Keypad
[Table 3-2] Using Call Button on the Keypad
Functions Descriptions
Retrieving the
Recent
Incoming Call
When you just press the Call button and leaving the phone is on the hook, the
recent incoming calls are listed. When you select one of the calls as to highlight,
you can make a call by pressing the call button again
Placing a Call
When the phone is on the hook, you can make a call by just pressing the
numeric buttons on the dial pad. Also the speed dial and recent call features of
the Call button allows you to make a call very easily.
Taking a Call
After all the settings are entered to apply, you can press the button and use it as
to confirm
* You must press OK button to apply all the settings that you have done in the Menu options. If you
want to keep the settings after restart, the settings must be saved to Tool Box-Save (reference to Tool
Box Menu)
The END button is used for the purposes described in [Table 3-3].