Installation guide

AP-IP120 IP Phone Installation Guide Version 1.0
AddPac Technology Proprietary & Documentation
24
Chapter 2. Preparing for Installation
Installation Requirement
The followings are the recommendation for safe operation of the equipment.
• Ensure AP-IP120 IP Phone is in a dust-free environment before and after installation.
• Ensure AP-IP120 IP Phone upper part is empty on a flat and safe surface.
• To prevent accidents, avoid ties, scarf, sleeves, and any other loose clothing from entangling with
the chassis.
• Avoid any actions that may lead to the malfunction of the equipment or the operator.
Electrical Requirement
There are two main sources of electrical problems with AP-IP120 IP Phone : the power supply and
static electricity.
This section describes safety recommendations for each case.
z Electrical Safety
9 In case of the occurrence of an electrical accident, operate at a position where
immediate shut-off of power supply is possible.
9 Switch the power off when installing or taking the cover off the equipment.
9 Avoid operating the equipment alone at a potentially dangerous environment.
9 Do not assume the power is switched off, but always confirm the power status.
9 Be extremely cautious when operating in humidity or with an uncovered power
extension cable.
z Prevention of Static Electricity
9 The main chip-set of the Videophone is very delicate and misuse may result in
static electrical damage.