Installation guide

AP-IP120 IP Phone Installation Guide Version 1.0
AddPac Technology Proprietary & Documentation
150
Call Waiting (SIP)
For any incoming call arriving to FXO can be placed on hold while the phone user is
on another VoIP call. While the phone user is on PSTN call, any incoming VoIP call
can be placed on hold as well. Call-waiting needs to be configured on speech port and
call-hold h also needs to be configured at the configuration mode. (Configuration on
CLI screen after connecting to Telnet)
[Table 5-2] Configuration Settings for Call Waiting
IP120#
IP120# con t
IP120(config)#
IP120(config)# dial-peer voice 0 pots => Speech Port Mode
IP120(config-dialpeer-pots-0)#
IP120(config-dialpeer-pots-0)# call-waiting => Set Speech Port Call Waiting
IP120(config-dialpeer-pots-0)#
IP120(config-dialpeer-pots-0)# exit
IP120(config)#
IP120(config)# dial-pee call-hold h => Set call-hold h from configuration mode
IP120(config)#
IP120(config)# show run => Verifying the configuration
Building configuration...
Current configuration:
version 8.41.014
hostname IP120
!
username root password router administrator
!
------ 중략 ------
! Voice port configuration.
!
! SPEECH
voice-port 0/0
!
!