Installation guide

AP-IP120 IP Phone Installation Guide Version 1.0
AddPac Technology Proprietary & Documentation
106
[Table 4-28] Description of Service Setup Menu Option
Menu Option Description
Actives/Deactivates the FTP service protocol. Default
is enable mode (activating FTP service). Default port
number is 21.
Actives/Deactivates the TELNET service protocol.
Default is enable mode (activating TELNET service).
Default port number is 23.
Actives/Deactivates the SNMP service protocol.
Default is enable mode (activating SNMP service).
Default port number is 161