User guide

www.addonics.com Technical Support (M-F 8:30am - 6:00pm PST) Phone: [phone] Email: www.addonics.com/support/query/
How to Remove the 5 ¼”
Drive Bay Front Panels:
1. Locate the 3 screws for each
front panel.
2. Turn screws
counterclockwise to loosen.
3. Pull the front panel forward,
away from the drive cage.
3 screws for each panel
Thermal Management Card on the RAID Rack
Features
Fan1 to Fan8 could be set either “ENABLE” or “DISABLE”. When all the fans are set
on “DISABLE”, the Fan LED will have no light on.
When Ambient temperature (or temperature inside the storage rack) is over the set
temperature, the LED will flash and the buzzer will sound.
Fan Connectors
Overheat Buzzer
Floppy Power Connector
Ambient Detect Terminal
Temp. Setting
(40°C, 50°C, 60°C)
Fan Detect Selection
Fan, Temperature and Power LED Connectors