User guide

www.addonics.com Technical Support (M-F 8:30am - 6:00pm PST) Phone: [phone] Email: www.addonics.com/support/query/
Power Cord (U.S. Version Shown) eSATA Cable
Network CableCipher Keys
WARNING: Please remember to
set the power supply to your local
outlet voltage prior to plugging in
the power cord. Failure to do so
may damage the power supply.
Power LED (next to Power Switch): glows green while unit is turned on.
Power LED (on Cipher Chain Module): glows green when Cipher is unlocked.
Drive Activity LED: Glows blue to indicate power, flashes magenta (blue
and red) to indicate activity.
HDD LED (on Cipher Chain Module): blinks to indicate RAID activity.
NAS Status LED (front and rear): glows when idle, blinks to indicate the unit
is booting or busy.
RAID Error: glows to indicate the RAID is either degraded or offline, blinks to
indicate rebuilding is in progress.
Drive Error: blinks to indicate a spare drive that is rebuilding.
RESET button (on Cipher Chain Module): press to activate with inserted key
(or deactivate if no key is inserted).
RESET button (rear, on NAS module): press and hold as described in
Resetting the NAS Unit.
SET button (rear, next to dipswitch): press and hold during power-up to set
or reset the RAID setting.
POWER LED (rear, on NAS module): indicates the NAS module is powered up.
RAID Setting Dipswitch: used with SET button to define or delete a RAID array.
DAS Connector: used for connecting the RAID array to an external computer.
RJ45 Connector: used for connecting to 10/100/1000 Mbit network.
USB Connector: used for attaching additional USB 2.0 storage to the NAS unit.