User guide

www.addonics.com Technical Support (M-F 8:30am - 6:00pm PST) Phone: [phone] Email: www.addonics.com/support/query/
Step 1 is to define the name of the share. The share name will become the folder
name on the drive.
NOTE: The shared folder name will be written to disk using all capital letters. If an existing folder of the same
name appears and is not all capital letters, the Secure NAS considers that not a match and writes the same
folder name in all capital letters anyway. This can cause unpredictable results if the drive is subsequently
connected to a computer. If a folder exists of the same name with all capital letters, it will be shared
without harming any data.
Step 2 is to select the drive the share is to be created on. The drive is identified by the
drive letter and partition number, the vendor and model, and the mount point.