User guide

www.addonics.com Technical Support (M-F 8:30am - 6:00pm PST) Phone: [phone] Email: www.addonics.com/support/query/
The next step is to configure network connections. The gateway is usually the
internal IP address for the router the Secure NAS unit is connected to. DNS
entries are usually the same as used by the router's external network configuration
(determined by your ISP). Setting an NTP server will synchronize the Secure NAS
unit to a time server, usually on the Internet. This can be a name or IP address.
Use the keywords “free NTP servers” on your preferred search engine if you wish
to configure this feature and don't know of a server you can use.
When the wizard is complete by either choosing Automatic in Step 1 or completing
Steps 2 and 3, a confirmation page will appear. Clicking the Finish button will apply
the settings.