User guide

www.addonics.com Technical Support (M-F 8:30am - 6:00pm PST) Phone: 408-453-6212 Email: www.addonics.com/support/query/
Choosing Automatic will configure the Secure NAS unit as a DHCP client and the
configuration wizard will skip to the end. Choosing Manual configuration will
proceed to Step 2.
Step 2 configures the Secure NAS unit's static IP address and subnet mask. To
choose a working static IP address, make sure you meet these criteria:
1. The subnet mask must match the rest of the network exactly.
2. The IP address must match the router's IP address exactly where the subnet
mask is "255."
3. The IP address cannot end in 0 or 255.
4. The IP address must not match any other system on the network.
5. The IP address should not be within the DHCP server's client pool.