User guide

www.addonics.com Technical Support (M-F 8:30am - 6:00pm PST) Phone: [phone] Email: www.addonics.com/support/query/
Once you have connected to the Web Interface, the Initial Setup page will appear:
Click Next, then a dialog will appear requesting the Administrator login. The
default username is "admin" and the password is "123456" (without the
double-quote marks). Next, set a custom password for the admin account. The
admin account name may also be changed.
Initial Setup
Windows: All of the Secure NAS unit's functions and features are configured
using a Web Interface. Once the hardware is installed, access the Web
Interface with a web browser on a computer attached to the same network by
typing in “http://addnas” - this will work on most Windows systems. Be sure the
computer accessing the NAS has the Workgroup name set to WORKGROUP.
MAC: Mac users may need to determine the Secure NAS unit's IP address by
opening a Terminal window and typing the following command:
smbutil lookup addnas
This utility should return the Secure NAS unit's IP address. Typing this address
into the web browser should open the Secure NAS unit's Web Interface.
Linux: Linux users may need to determine the Secure NAS unit's IP address if
Windows name resolution support is not fully installed and configured, by
examining the DHCP server's clients table and attempting to connect to each
unidentified IP address using a browser until the Secure NAS unit's Web
Interface appears.