Datasheet

www.addonics.com
Addonics Technologies Inc.
1918 Junction Avenue, San Jose, CA 95131
Phone: [phone] | Fax: [phone]
INTRODUCTION
About the 1:5 HDD Duplicator Series
The latest Addonics 1:5 HDD (Hard Disk Drive) Duplicator can copy
as many as 5 target drives from a single source, making this the ideal
solution for production or data distribution applications. Addonics 1:5
HDD duplicator operates totally as a stand alone. There is no
computer needed or complex software to operate. Set up is
accessed via a LCM control panel on the front of the unit. Once
configured, simply insert up to 5 hard drives of equal or larger
capacity than the master drive into the duplicator, load the master
hard drive, lock the drive door and push the start button to start the
copying process.
Model: HDSI5TDRHS, HDUSI5TDR
1:5 HDD/SSD Duplicator PRO
About This Model:
The PRO model allows you to duplicate any 3.5" or 2.5" SATA or IDE hard drive to eleven 3.5" or 2.5" SATA or
IDE hard drives in any combination. Any 2.5" or 3.5" hard drives or SSDs can be placed inside the easily remov-
able drive enclosures to be used as a source or target drive. With additional optional IDE drive enclosures,
practically any hard drives or SDDs with a IDE or SATA interface in 2.5" or 3.5" form factors can all be mixed into
the eleven target drive bays to be duplicated at one time. By adding an optional Diamond Cipher drive enclosure,
one can easily make backup copies of sensitive data with bullet proof AES-256 bit encryption. The Diamond
Cipher Drive enclosure can also be used as a sanitizing tool to turn any used hard drives into brand new drives
with no traces of any previous data. The PRO model is the ideal duplicator for organizations with a wide variety of
hard drives and needs to migrate OS or data into different storage media, to upgrade systems with same hard
drive image or to wi
pe clean data from used hard drives.
There is also choice of a High Speed model that maintains a steady high performance duplication from one to five
drives.
Feature highlight:
• Copy from 1 to 5 2.5"/3.5" SATA or IDE hard drives
• Source drive and target drive can be SATA or IDE, 2.5" or 3.5" in any
mix.
• Six SATA drive enclosures and one IDE drive enclosure are included.
The drive enclosure can be used as a source or a target drive.
• Addition IDE drive trays are required in order to copy more than one
IDE hard drive
• Drive is added and removed from the source or target bay via either a
SATA or IDE drive enclosure
• Drive can be mounted into drive enclosure without any special tool