Leaflet
www.addonics.com
Addonics Technologies Inc.
1918 Junction Avenue, San Jose, CA 95131
Phone: 408.573.8580 | Fax: 408.573.8588
SPECIFICATIONS
Hybrid HDD - SSD Controller
AD2SAHSSD
• 6Gbps SATA III 2 Ports PCIe Gen2 1 Lane Host Adapter
• Supports PCIe 1.0 and PCIe 2.0 motherboard
• Compliant with 5Gbps PCI Express 2.0
• Fully compliant with Serial ATA specifications 3.0
• Supports SATA III transfer rate of 6.0Gbps, 3.0Gbps, 1.5Gbps
• Support HybridDrive (HDD+SSD), Hardware RAID0, RAID1
• HybridDrive enables 80 percent of the performance of a solid state drive (SSD) at one-third the cost
• HybridDrive Modes: Safe Mode (Mirrored Protection), Capacity Mode (Cost-Optimized)
• Supports ATA and ATAPI commands
• Supports Native Command Queuing (NCQ)
• Supports one Port Multiplier FIS-based or Command-based switching and max two RAID groups
• Low Profile PCIe Form Factor
• Includes PCIe Low Profile and regular size two Brackets
• Two Pin headers on board for LED connection
• Compatible with Windows 2000, Windows XP, 2003, Vista, Windows 7, 2008
• Dimensions: (W x D x H) - 65mm x 10mm x 55mm (2.56in x .39in x 2.17in)
• Weight: 30g ( 1.16oz)
• Operating temperature range: 0 °C to +70 °C
• Operating humidity range: 5% to 90%
• Storage temperature range: -40 °C to +85 °C
• Storage humidity range: 5% - 95% (non condensing)
• 1 year warranty
• RoHS Compliant
FEATURES
• Increase system overall performance using SSD while increasing overall system storage capacity with regular low
cost hard drives.
• HybridDrive mode enables 80 percent of the performance of a solid state drive (SSD) on any SATA hard drive at
one-third the cost of SSD
• HybridDrive Modes: Safe Mode (Mirrored Protection), Capacity Mode (Cost-Optimized)
• Support HybridDrive (HDD+SSD), Hardware RAID0, RAID1
• Port Multiplier Compatible
• Hot swappable - drive can be removed and added without system shut down or restart **
• Maximum 6Gbits/sec*
• Supports Native Command Queuing (NCQ)
• Supports SATA III transfer rate of 6.0Gbps, 3.0Gbps, 1.5Gbps
• Install into both standard height or low profile system with included brackets
• 2 LED connections for drive activity
• Includes both standard height and low profile PCI-E brackets
*To achieve the maximum throughput, the PCI-Express slot must be version 2.0 or higher. Older system with PCD-Express 1.0 will limit the
speed to 2.5 Gbps. Performance per port may decrease if both ports are transferring data simultaneously due to the limited throughput of the
PCI-Express slot. Please visit following web page for more information of ExpressCard v1.0 and v2.0 http://en.wikipedia.org/wiki/PCI_Express
*** Hot swapping hard drive has been tested on Windows OS only.