User`s guide

In Function 8, there are 13 subfunctions.
1 Copy HDD
Copy HDD copies data directly from the source hard disk to the target hard disks.
Make sure that the capacity of the target hard disk is equal or larger than
the source hard disk.
Choose option 1 from the menu:
Press ENT to begin copy. The system will auto-detect the hard disks and show
the following info on the LCD.
The LCD will show the following info during the copying process: remaining time,
completed percentage. The copy speed, capacity and time will vary depending
on the source hard disk. Once the copying process is complete the LCD will
display the following results.
2 Async Copy HDD
Copy HDD copies data directly from the source hard disk to the target hard disks.
While duplication process is on-going, allows you to plug-in additional target
drives and duplication will automatically start for the added target drive.
Choose option 2 from the menu:
Press ENT to begin copy. The system will auto-detect the hard disks and show
the following info on the LCD.
If the duplicator detects a drive whose capacity is less than the source drive, the
LCD will display the corresponding channel number. For example, the 5
th
drive.
The LCD will show the following info during the copying process: remaining time,
completed percentage. The copy speed, capacity and time will vary depending
on the source hard disk. Once the copying process is complete the LCD will
display the following results.
3 Compare HDD
Compare HDD is used to see if the data on a source hard disk is identical to the
target hard disk after the Copy HDD operation.
Choose option 3 from the menu:
Press ENT to begin the comparison. The LCD will display the following info
Once the comparison is complete the LCD will display the following info as well
as the amount of data on the source hard disk.