User`s guide

ManualsBrandsAddonics Manualscomputers & electronics1:3 HDD Duplicator Pro

Addonics

TECHNOLOGIES

HDD Duplicator Panel

HDUSI3TDR, HDUS3325DX,

HDUSI5TDR, HDUS5325DX

User’s Guide

Technical Support

If you need assistance to get your unit functioning properly, please call Addonics Technical

Support. Our technical staff will be happy to assist you, but they will need your help to do

so. Calling the technical support staff without all the proper information can be both time

consuming and frustrating. Here are some tips to help you out:

Contact Information

Phone: 408-573-8580

Fax: 408-573-8588

Email: http://www.addonics.com/sales/query/

Internet: http://www.addonics.com

TECHNICAL SUPPORT

Phone: 408-453-6212

Hours: 8:30 am - 6:00 pm PST

Email: http://www.addonics.com/support/query/

The Panel

There are four buttons and an LCD on the panel of DVD Duplicator.

1 – LCD shows a function or a message.

2 – it is used to scroll up function menus.

3 – it is used to scroll down function menus.

4 – it is used to execute a function.

5 – it is used to cancel a function.

Functions

The HDD Duplicator has 6 functions in total.

Summary of content (5 pages)

PAGE 1
The Panel Addonics There are four buttons and an LCD on the panel of DVD Duplicator. 1 – LCD shows a function or a message. 2 – it is used to scroll up function menus. 3 – it is used to scroll down function menus. 4 – it is used to execute a function. 5 – it is used to cancel a function. T E C H N O L O G I E S HDD Duplicator Panel HDUSI3TDR, HDUS3325DX, HDUSI5TDR, HDUS5325DX Functions The HDD Duplicator has 6 functions in total.
PAGE 2
In Function 8, there are 13 subfunctions. on the source hard disk. Once the copying process is complete the LCD will display the following results. 2 Async Copy HDD Copy HDD copies data directly from the source hard disk to the target hard disks. While duplication process is on-going, allows you to plug-in additional target drives and duplication will automatically start for the added target drive. Choose option 2 from the menu: Press ENT to begin copy.
PAGE 3
4 Async Compare Compare HDD is used to see if the data on a source hard disk is identical to the target hard disk after the Copy HDD operation. While compare process is ongoing, allows you to plug-in additional target drives and comparison will automatically start for the added target drive. Choose option 4 from the menu: 7 Source HDD Size Source HDD Size is used to show the capacity of the source hard disk. Choose option 7 from the menu: Press ENT and the LCD will show the following info.
PAGE 4
8.3 Startup Menu This option allows you to set an option other than "Setup" to be displayed as the first available option on the menu every time you start the system. Press ENT then use the Up and Down arrow keys to choose other options. By default the first menu option is Copy HDD. 8.4 Auto Compare This option automatically compares the source hard disk with the target hard disk after a copy operation is completed. Press ENT to access option. By default it is set to Off.
PAGE 5
8.12 BootTime Delay This option is used to set boot delay time. Appendix A LCD Messages Press ENT to enter the following figure. The default is 5 sec. Use the Up and Down arrow keys to choose 0~99 sec. 5.8.13 Quick Compare This option is used to set the size of each comparison unit. Press ENT to enter the following figure. The default is OFF. Use the Up and Down arrow keys to choose 1 Byte/1K/10K/100K/1MB/10MB/100 Mbytes. (In order to improve the accuracy of pure data can maintain the default settings.