User manual

Below are the setup instructions.
Microsoft MPIO is NOT supported on Windows XP or Windows 2000
Professional.
Workaround solution: Using Windows Server 2003, 2008 or Windows
2000 server to run MPIO. You have to enable MPIO or install MPIO driver on the
server before doing this instruction.
On a Windows Server 2008, to install MPIO
1. In the Server Manager console tree, click Features node.
2. In the Features pane, under Features Su mmary, click Add
Features.
3. In the Add Features wizard, select Multipath I/O check box,
and click Next.
4. Follow the steps on the Add Features wizard.
1. Create a VG with RAID 5, using 3 HDDs.
Figure F.2
2. Create a UDV by using RAID 5 VG.
Figure F.3