User manual

Error
UPS power low Error: UPS Power Low!!! The system will do the
auto shutdown immediately.
Info
Mgmt Lan Port
Active
Info: Management LAN Port is active.
Warning
Mgmt Lan Port
Failed
Warning: Fail to manage the system via the
LAN Port.
Info
RTC Device OK Info: RTC device is active.
Warning
RTC Access Failed Warning: Fail to access RTC device
Info
Reset Password Info: Reset Admin Password to default.
Info
Reset IP Info: Reset network settings set to default.
• System config events
Level Type Description
Info Sys Config.
Defaults Restored
Info: Default system configurations restored.
Info
Sys NVRAM OK Info: The system NVRAM is active.
Error
Sys NVRAM IO
Failed
Error: Can’t access the system NVRAM.
Warning Sys NVRAM is full Warning: The system NVRAM is full.
• System maintenance events
Level Type Description
Info Firmware
Upgraded
Info: System firmware has been upgraded
Error
Firmware
Upgraded Failed
Error: System firmware upgrade failed.
Info
System reboot Info: System has been rebooted
Info System shutdown Info: System has been shutdown.
Info
System Init OK Info: System has been initialized OK.
Error
System Init Failed Error: System cannot be initialized in the last
boot up.
• LVM events
Level Type Description
Info
VG Created OK Info: VG <name> has been created.
Warning
VG Created Fail Warning: Fail to create VG <name>.
Info
VG Deleted Info: VG <name> has been deleted.
Info
UDV Created OK Info: UDV <name> has been created.
Warning
UDV Created Fail Warning: Fail to create UDV <name>.
Info
UDV Deleted Info: UDV <name> has been deleted.
Info
UDV Attached OK Info: UDV <name> has been LUN-attached.
Warning
UDV Attached Fail Warning: Fail to attach LUN to UDV <name>.
Info
UDV Detached OK Info: UDV <name> has been detached.