User manual

Figure 3.6.7.7
(Figure 3.5.8.7: Slot 4 is set as global spare disk.)
Step 5: Done. They can be used as disks.
Delete VDs, RG, follow the steps listed below.
Step 6: Detach LUN from VD .
In “/ Volume configuration / Logical unit”,
Figure 3.6.7.8
1. Move cursor to the gray button next to the LUN; click “Detach”. There
will pop up a confirmation page.
2. Choose “OK”.
3. Done.
Step 7: Delete VD (Virtual disk).
To delete the Virtual disk, follow the p rocedures:
1. Select “/ Volume config uration / Virtual disk”.
2. Move cursor to the gray button next to the VD number; click “Delete”.
There will pop up a confirmation page , click “OK”.
3. Done. Then, the VDs are d eleted.
Tips
When deleting VD, the attached LUN(s) related to this VD will
be detached automatically.
Formatted
Formatted