User manual

Figure 3.6.7.6
(Figure 3.5.8.6: VD-R5-1 is attached to LUN 0. VD-R5-2 is attached LUN 1.)
Step 4: Set global spare disk.
To set global spare disks, follow the steps below.
1. Select “/ Volume configuration / Physical disk” .
2. Move cursor to the gray button next to the PD slot; click “Set Global
spare”.
3. “GS” icon is shown in “Usage” column.
Tips
The rules of access control are rank in importance from top to
bottom in the list.
Formatted