User manual

Figure 3.6.7.4

(Figure 3.6.7.4: Create VDs named “VD-R5-1” and “VD-R5-2”. Regarding to “RG-R5”, the

size of “VD-R5-1” is 100GB, the size of “VD-R5-2” is 48GB. “VD-R5-1” is initialing about

3%. There is no LUN attached.)

Step 3: Attach LUN to VD.

There are 2 methods to attach LUN to VD.

1. In “/ Volume configuration / Virtual disk”, move cursor to the gray

button next to the VD number; click “Attach LUN”.

2. In “/ Volume configuration / Logical unit”, click

“ ”.

The procedures are as follows :

Figure 3.6.7.5

1. Select a VD.

2. Input “Host” name , which is a FC node name for access control, or fill -

in wildcard “*”, which means every host can access to this volume.

Choose LUN and permission, then click “ ”.

3. Done.

Formatted