User manual

Figure 3.6.7.2
(Figure 3.6.7.2: Creating a RAID 5 with 3 physical disks, named “RG-R5”. The total size is
148GB. Because there is no related VD, free size still remains 148GB.)
Step 2: Create VD (Virtual disk).
To create a data user volume, follow the steps below.
Figure 3.6.7.3
5. Select “/ Volume configuration / Virtual disk”.
6. Click “ ”.
7. Input a VD name, choose a RG Name and enter a size of VD; decide
the stripe high, block size, read/write mode and set priority, finally click
“ “.
8. Done. A VD has been created.
9. Do one more time to cre ate another VD.
Formatted
Formatted