User manual

3.6.4 Virtual disk
“Virtual disk” allows you to view the status of each Virtual disk. The following is
an example to create a VD.
Step 1: Click “ ”, enter “Name”, choose “RG name”,
“Stripe height (KB) ”, “Block size (B)”, “Read/Write” mode, “Priority”, “Bg
rate” (Background task priority), change “Capacity (GB) ” if necessary. Then
click “ ”.
Figure 3.6.4.1
Step 2: Confirm page. Click “ ” if all setups are correct .
Figure 3.6.4.2
(Figure 3.6.4.2: Create a VD named “VD-01”, related to “RG-R0”, size is 30GB. The other
VD is named “VD-02”, initializing to 12%.)
Formatted
Formatted