User manual

Step 4: Confirm page. Click “ ” if all setups are correct. Then
a VD will be created.
Done. You can start to use the system now.
Figure 3.3.2
3.6.2 Physical disk
“Physical disk” allows you to view the status of hard drives in the system. The
followings are operational tips:
1. Move the cursor to the gray button next to the drive number under Slot .
It will show the functions that can be executed.
2. Active functions can be selected, but inactive functions will be grayed
out.
For example, set PD slot number 11 to dedicated spare disk.
Step 1: Move the cursor to the gray button of PD 11, select “Set Dedicated
spare”, it will link to next page.
Figure 3.6.2.1
Formatted
Formatted