User manual

3.6.1 Volume creation wizard
The “Volume creation wizard ” has a smart policy. When the system is full ,
meaning all 8 HDD are connected , and all HDD have the same size, ISC8P2G -
S’s Quick Install function lists all possible configurations and si zes among
different RAID level options. The ISC8P2G -S Quick Installation will use all
available HDD for the RAID level which the user decides.
But when the system is inserted with different sizes of HDD, e.g., 6*200G HDD
and 2*80G, ISC8P2G -S also lists all possible combinations of different RAID
Level and different sizes and you may observe there are some HDD not used
(Free Status).
Step 1: Click “Quick installation” , then choose the RAID level. After choosing
the RAID level, then click “ ”. It will link to another page.
Figure 3.3.1
Step 2: Click “ ” to use default algorithm.
Step 3: Click “ ” to select the default volume size.
Formatted