User manual

3.5.1 Entity property

“Entity property ” will enable you to view the entity name of the ISC8P2G-S, and

setup “iSNS IP” for iSNS (Internet Storage Name Service ). iSNS protocol allows

automated discovery, management and configuration of iSCSI devices on a

TCP/IP network. If using iSNS, you need to install a iSNS server in the SAN. Add

an iSNS server IP address into iSNS server lists in order that iSCSI initiat or

service can send queries. The entity name of ISC8P2G-S can not changed.

Figure 3.5.1.1

3.5.2 NIC

“NIC” can change IP addresses of iSCSI data ports. The ISC8P2G -S has two

gigabit LAN ports to transmit data.

Figure 3.5.2.2

(Figure 3.5.2.2: ISC8P2G-S has 2 iSCSI data ports. Each of them is set to dynamic IP.)

IP settings:

User can change the IP address by moving cursor to the gray button of the LAN

port, select “IP settings for iSCSI ports ” from the drop down menu . There are 2

selections, DHCP (Get IP address from DHCP server) or static IP.

Figure 3.5.2.4

Formatted