User manual

3.4 System configuration
“System configuration” is used for setting up the “System setting”, “IP
address”, “Login setting”, “Mail setting”, and “Notification setting ”.
Figure 3.4.1
3.4.1 System setting
“System setting ” can set system name and date . Default “System name” is
the model name, e .g.: ISC8P2G-S. You can modify the system name.
Figure 3.4.1.1
Check “Change date and time” to set up the current date, time, and time zone
before using or synchronize time from NTP (Network Time Protocol) server.
Formatted
Formatted