User manual

3.3 Quick Installation
The “Quick installation” function is used to create a volume.
The ISC8P2G-S Quick Install ation function has a smart policy. When the system
is full, meaning all 8 HDD are connected and all HDD have the same size,
ISC8P2G-S’s Quick Install function lists all possible configurations and sizes
among different RAID level options. The ISC8P2G -S Quick installation will use all
available HDD for the RAID level which the user decides.
But when the system is inserted with different sizes of HDD, e.g., 6*200G HDD
and 2*80G, ISC8P2G -S also lists all possible combinations of different RAID
Level and different sizes and you may observe there are some HDD not used
(Free Status).
Step 1: Click “Quick installat ion”, then choose the RAID level. After choosing
the RAID level, then click “ ”. It will link to another page.
Figure 3.3.1
Step 2: Click “ ” to use default algorithm.
Step 3: Cl ick “ ” to select the default volume size.
Formatted