User manual

Press “ENT”.
The following are LCM functions: “Alarm Mute”, “Reset/Shutdown” , “Quick
Install”, “View IP Setting”, “Change IP Config” and “Reset to Default” . To
shift between the menus, press • (up) or ‚ (down) buttons.
When a WARNING or ERROR is detected within the device , the LCM displays
the event log to provide users more detail s.
The following table shows each function ’s description.
System Info.
Display system information.
Alarm Mute
To mute the alarm when an error occurs, select this
function.
Reset/Shutdown
To reset or shutdown the ISC8P2G -S.
Quick Install
Three Quick steps to create a volume. Refer to section
3.3 for procedure using the web GUI.
Volume Wizard
Smart steps to create a volume. Refer to next chapter for
operation in web UI.
View IP Setting
Display current IP address, subnet mask, and gateway.
Change IP
Config
Set IP address, subnet mask, and gateway. There are 2
selections, DHCP (Get IP address from DHCP server) or
set static IP.
Reset to Default Reset to default sets password to default: supervisor,
and set IP address to default as DHCP setting.
Example:
Default IP address: 192.168.1.50 (DHCP)
Default subnet mask: 255.255.255.0
Default gateway: 192.168.1.254