User manual

2.3.2 Console serial port (Optional)

Use NULL modem cable to connect console port.

The console setting is baud rate: 115200, 8 bits, 1 stop bit, and no parity.

Terminal type: vt100

Default password: supervisor

2.3.3 Remote control – secure shell

SSH (secure shell) is requir ed for ISC8P2G -S to remote login. The SSH client

software is available at the followin g web site:

SSHWinClient WWW: http://www.ssh.com/

Putty WWW: http://www.chiark.gre enend.org.uk/

Host name: 192.168.1.50 (Check your DHCP address for this field.)

Default password: supervisor

E.g.

$ ssh admin@192.168.1.50

2.4 Enclosure

2.4.1 LCM

There are four buttons to control ISC8P2G-S LCM (LCD Control Module) ,

including:

• (up), ‚ (down), ESC (Escape), and ENT (Enter).

After booting up the system, the following screen shows web GUI port IP and

model name:

192.168.1.50

Addonics ISC8P2G-S•

Tips

ISC8P2G-S only support SSH for remote control. When using

SSH, the IP address and the password is required for login.