Specifications

Zebra Snap-In Mobile Rack with eSATA interface
The Zebra Snap-in Mobile Rack, the Snap-In Mobile Rack installed inside the Zebra eSATA or eSATA/USB drive
enclosure, is a convenient external removable hard drive system. When attached to system via USB 2.0, hard
drives of any capacity can be conveniently added or remove from the system, similar to a tape cassette.
More Info...
Zebra Snap-In Mobile Rack with eSATA/USB interface
The Zebra Snap-in Mobile Rack, the Snap-In Mobile Rack installed inside the Zebra eSATA or eSATA/USB drive
enclosure, is a convenient external removable hard drive system. When attached to system via USB 2.0 or a hot
swappable eSATA port, hard drives of any capacity can be conveniently added or remove from the system, similar
to a tape cassette.
More Info...
Zebra eSATA / USB 2.0 Combo Drive Enclosure
The latest addition to the Zebra family is the eSATA/USB combo model featuring built in eSATA and USB 2.0
interface. These two interfaces allows you to connect any SATA hard drives to any computer equipped with a high
speed eSATA port or the convenience of the USB port that is available in variety of computers.
More Info...
Zebra USIB Drive Enclosure for SATA devices
The Zebra USIB model is equipped with a SATA - USIB connector on the back panel. Practically any SATA storage
device can be turned into an external storage device. Once the storage device is installed into the drive enclosure, it
can then be connected to any computer with USB 2.0, Firewire or eSATA interface by attaching different optional
Addonics USIB interface cables.
More Info...
Zebra eSATA Drive Enclosure
The Zebra eSATA model features a SATA to eSATA bridge connector on the back panel. It is an simple and
economical solution for turning any SATA storage device into an external eSATA storage. By adding an optional
IDE - SATA converter, practically any IDE storage device can also be installed into the Zebra eSATA enclosure.
The eSATA interface can be instantly converted to the ubiquitous USB interface by attaching the Addonics eSATA -
USB adapter.
More Info...
Diamond ExDrive for SATA hard drive with eSATA or eSATA/USB 2.0 External Connection
The Diamond ExDrive Kit features the new generation of eSATA hard drive enclosures using native eSATA
interface for the highest performance possible today through an externally connected hard drive enclosure.
Designed for accommodating any standard 3.5" SATA or IDE hard drive, the Diamond ExDrive provides data
transfer speeds approximately three times the maximum throughput of traditional drive enclosures utilizing the
standard USB or Firewire interfaces.
More Info...
Saturn Cipher ExDrive for SATA hard drive (SCED)
One of the most advanced hardware based hard drive encryption solutions in the market for SATA/SATA II hard
drive. It is easy to deploy and implement. There is no software to install and no training is required. Designed almost
identical to the regular Saturn enclosure kit, the only difference is the additional encryption key and electronics in
the Saturn Cipher drive enclosure. Optional 2.5" converter kits are available for the Saturn SATA enclosure to install
2.5" SATA hard drives.
More Info...
Saturn ExDrive for SATA hard drive (SED)
The new generation of external hard drive kit with many improvements. The SED for SATA hard drive is the first
hard drive kit in the market that enables any SATA hard drive to be used as an external hard drive via USB,
Firewire, or External SATA connection. Optional 2.5" converter kits are available for the Saturn SATA enclosure to
install 2.5" SATA hard drives.
More Info...
External Drive Enclosure for SATA drives with USB 2.0/1.1 and Firewire 400 interface
A strong and stylish aluminum enclosure that turns any 3.5" SATA or SATA II hard drive into an external hard drive
with fast and convenient USB 2.0/1.1 and Firewire 400 interface.
More Info...