Specifications

SNAP-IN HARD DRIVE KIT
External Snap-In
Snap-In ExDrive25 NEW
The Addonics Snap-In ExDrive25 is the simplest portable 2.5" hard drive enclosure solution in the market. Practically
any 2.5" SATA hard drive can be instantly installed into the enclosure without any tool or mounting screw. In fact, the
Snap-In ExDrive25 is just like a hard drive reader/writer - swapping in and out with different hard drive any time and
anywhere.
More Info...
Zebra Snap-In Mobile Rack with eSATA interface
The Zebra Snap-in Mobile Rack, the Snap-In Mobile Rack installed inside the Zebra eSATA or eSATA/USB drive
enclosure, is a convenient external removable hard drive system. When attached to system via USB 2.0, hard drives
of any capacity can be conveniently added or remove from the system, similar to a tape cassette.
More Info...
Zebra Snap-In Mobile Rack with eSATA/USB interface
The Zebra Snap-in Mobile Rack, the Snap-In Mobile Rack installed inside the Zebra eSATA or eSATA/USB drive
enclosure, is a convenient external removable hard drive system. When attached to system via USB 2.0 or a hot
swappable eSATA port, hard drives of any capacity can be conveniently added or remove from the system, similar
to a tape cassette.
More Info...
Zebra Disk Array
Utilizing the latest SATA technologies, the Zebra Disk Array offers the fastest external storage performance with
data throughput up to 3Gbps via either a single eSATA or Multilane connection to a computer. By integrating the
Addonics latest 2.5" Disk Array and a SATA Port Multiplier or Multilane connector into the the compact Zebra drive
enclosure, up to 4 SATA hard drives or SSDs can be installed to the Zebra Disk Array via the 4 convenient
removable drive trays.
More Info...
Internal Snap-In
Snap-In Double Drive NEW
Built on the same reliable and convenient removable mechanism of the Snap-In Mobile Rack, the Addonics Snap-In
Double Drive now enables 2.5" SATA hard drives to be use like a tap cartridge in any Desktop, rack mount or
industrial PC. Designed to fit inside a standard 3.5" drive bay, the Snap-In Double Drive accommodates up to two
hard drives.
More Info...
Snap-In SATA Mobile Rack
The Snap-In SATA Mobile Rack for 3.5" SATA hard drive is the greatest cost effective solution for a hot swappable
removable hard drive system without need for a hard drive enclosure. By attaching one of our optional converter
boards to the back of the Snap-In SATA Mobile Rack, the Snap-In SATA Mobile Rack can then be interfaced into
any computer via IDE, USB, or SCSI interface.
More Info...