User guide

25 | P a g e
H8/H89-Z67-IDE – BOOTING FROM IDE SLAVE DRIVE
If the WH-8-37 controller is the primary controller, then press the following key sequence on the H8
front panel to boot from the Slave drive;
H8 Key
H8 LED Display
0
dEu
2
H67 Por
1
H67 174 Uni
1
Uni H67
If the Z-89-67 controller is present on the H89 Computer, then by pressing the S and the 1 key will cause
to boot from the Slave drive. (IDE: SS-1)
Figure 9: H8 CP/M boot from Slave drive (01:)