Computer Accessories User Manual

www.addonics.com Technical Support (M-F 8:30am - 6:00pm PST) Phone: [phone] Email: www.addonics.com/support/query/
The RAID and Disk Information screen (shown when the program was launched)
will now show the Port Multiplier with an Array. The drives are now listed as
M0-M4, indicating they are members of the array. If spares are present
(individual drives added later, and the EZ switch is in the OFF position), they
would be listed as S0, S1, etc. On the right pane, the RAID Level, status, capac-
ity and members that are online are listed. Status will show “Normal” (all mem-
bers on line), “Degraded” (a fault-tolerant array with a drive failure needing
service), “Rebuilding” (a fault-tolerant array in the process of reconstructing lost
data onto a spare) or “Broken” (an array that has lost all data).
In the event of a drive failure, the Jmicron RAID Manager will present a dialog
box such as the one shown below, even if it is currently minimized to the system
tray: