User guide

www.addonics.com Technical Support (M-F 8:30am - 6:00pm PST) Phone: [phone] Email: www.addonics.com/support/query/
The NAS3.0 adapter is a flexible, economical and powerful unit for your Network.
Follow the instructions to help you connect, setup, and configure it.
Note: Any external USB storage device that you connect to the NAS 3.0 adapter
is required to be pre-formatted with either NTFS, FAT32 or FAT64. When the external
USB storage device is connected to the NAS 3.0 adapter, it creates a configuration
file and a default Public folder.
If you are connecting an external USB drive with data on it, all the data will remain on
the drive but the NAS cannot see those data unless transferred to the Public folder.
Network Environment
There are 3 different setup conditions you can choose:
A. Setup NAS30U2 as a DHCP Client:
If the NAS30U2 is connected to a LAN network with an active
DHCP server, it will obtain an IP address from DHCP server
automatically.
B. Setup NAS30U2 as DHCP Server:
If your LAN network does not have an active DHCP server, the
NAS30U2 will immediately act as DHCP server and assign itself an
IP address for installation.
C. Setup NAS30U2 in Static IP environment:
You first need to configure the IP address for NAS30U2 to operate
in the static IP environment. For Configuring details, please refer to
“LAN Config” setup page.
Illustration of a NAS30U2 connected over the network
1