Specifications

ManualsBrandsAddonics Technologies ManualsComputer equipmentAD2SA3GPX1

SATA-IO Confidential 5

Table of Contents

Goals, Objectives, & Constraints............................................................................................................................... 8

1.1. References ......................................................................................................................................................... 8

1.1.1. Definitions ................................................................................................................................................... 9

1.1.2. Conventions ................................................................................................................................................ 9

1.2. Product Classes ............................................................................................................................................... 10

1.2.1. Expected Behavior .................................................................................................................................... 10

1.2.2. Measurement Requirements .................................................................................................................... 10

1.2.3. Pass/Fail Criteria ....................................................................................................................................... 10

1.3. Methods of Implementation .............................................................................................................................. 11

1.4. Test Product Considerations ............................................................................................................................ 11

1.4.1. Common Host/Device/Port Multiplier BIST Considerations ...................................................................... 11

1.4.2. Device specific considerations .................................................................................................................. 11

1.4.3. Cable Considerations ................................................................................................................................ 11

1.4.4. Host Considerations .................................................................................................................................. 12

1.4.5. Port Multiplier Considerations ................................................................................................................... 12

2. Interoperability Specification Test Summary ........................................................................................................... 12

2.1. General Test Requirements ............................................................................................................................. 15

2.1.1. GTR-01 – Software Reset......................................................................................................................... 15

2.1.2. GTR-02 -- 3Gb/s Backwards Compatibility ............................................................................................... 15

2.1.3. GTR-03 – DMA Protocol Support ............................................................................................................. 16

2.1.4. GTR-04 – General SATA Support ............................................................................................................ 17

2.1.5. GTR-05 : Unrecognized FIS receipt (Informative) .................................................................................... 17

2.2. Native Command Queuing ............................................................................................................................... 18

2.2.1. NCQ-01 : Forced Unit Access................................................................................................................... 18

2.2.2. NCQ-02 : Read Log Ext log page 10h support ......................................................................................... 18

2.2.3. NCQ-03 : Intermix of Legacy and NCQ commands ................................................................................. 19

2.2.4. NCQ-04 : Device response to malformed NCQ command ....................................................................... 20

2.2.5. NCQ-05 : DMA Setup Auto-Activate ......................................................................................................... 21

2.3. Asynchronous Signal Recovery ....................................................................................................................... 21

2.3.1. ASR-01 : COMINIT response interval ....................................................................................................... 21

2.3.2. ASR-02 : COMINIT OOB Interval ............................................................................................................. 22

2.3.3. ASR-03 : COMRESET OOB Interval ........................................................................................................ 22

2.4. Software Settings Preservation ........................................................................................................................ 23

2.4.1. SSP-01 : Initialize Device Parameters ...................................................................................................... 23

2.4.2. SSP-02 : Read/Write Stream Error Log .................................................................................................... 23

2.4.3. SSP-03 : Security Mode State .................................................................................................................. 24

2.4.4. SSP-04 : Set Address Max ....................................................................................................................... 24

2.4.5. SSP-05 : Set Features – Write Cache Enable/Disable ............................................................................. 25

2.4.6. SSP-06 : Set Features – Set Transfer Mode ............................................................................................ 26

2.4.7. SSP-07 : Set Features – Advanced Power Management Enable/Disable ............................................... 26

2.4.8. SSP-08 : Set Features – Read Look-Ahead ............................................................................................. 27

2.4.9. SSP-09 : Set Features – Release Interrupt .............................................................................................. 27

2.4.10. SSP-10 : Set Features – Service Interrupt ............................................................................................ 28

2.4.11. SSP-11 : Set Multiple Mode .................................................................................................................. 28

2.5. Interface Power Management .......................................................................................................................... 29

2.5.1. IPM-01 : Partial State exit latency (host-initiated) ..................................................................................... 29

2.5.2. IPM-02 : Slumber State exit latency (host-initiated) ................................................................................. 30

2.5.3. IPM-03 : Speed matching upon resume (host-initiated) ........................................................................... 31

2.5.4. IPM-04 : NAK of requests when support not indicated ............................................................................. 31

2.5.5. IPM-05 : Response to PMREQ_P ............................................................................................................ 32

2.5.6. IPM-06 : Response to PMREQ_S ............................................................................................................ 32

2.5.7. IPM-07 : Device default setting for device initiated requests .................................................................... 33

2.5.8. IPM-08 : Device Initiated Power Management enable / disable ............................................................... 34

2.5.9. IPM-09 : Partial State exit latency (device-initiated) ................................................................................. 34