English £ Deutsch Franęais Italiano Espanol Русский Portugu'js
Copyright Notice: No part of this installation guide may be reproduced, transcribed, transmitted, or translated in any language, in any form or by any means, except duplication of documentation by the purchaser for backup purpose, without written consent of ASRock Inc.
Motherboard 1 2 1 2 3 4 5 6 7 8 9 10 11 12 13 14 Layout 3 PS2_USB_PWR1 Jumper ATX Power Header (ATXPWR1) CPU Heatsink Retention Module CPU Socket CPU Fan Connector (CPU_FAN1) North Bridge Controller 184-pin DDR DIMM Slots (DDR D1MM1- 2) Secondary IDE Connector (IDE2, Black) Primary IDE Connector (IDE1,Blue) ASRock Graphics Interface Slot (AGP1) South Bridge Controller Chassis Fan Connector (CHA_FAN1) Floppy Connector (FLOPPY1) 4 5 6 7 15 16 Chassis Speaker Header (SPEAKER1) Infrared Module Header (
ASRock S/O™ Parallel Port RJ-45 Port Game Port Microphone In (Pink) Line In (Light Blue) 6 Line Out (Lime) 7 8 9 USB 2.
1. Introduction Thank you for purchasing ASRock P4i45GV motherboard, a reliable motherboard produced under ASRock's consistently stringent quality control. It delivers excellent performance with robust design conforming to ASRock's commitment to quality and endurance. This Quick Installation Guide contains introduction of the motherboard and step-bystep installation guide. More detailed information of the motherboard can be found in the user manual presented in the Support CD.
1.2 Specifications Platform: Micro ATX Form Factor: 9.6-in x 8.2-in, 24.4 cm x 20.8 cm CPU: Socket 478, supports Intel® Pentium"4 (Prescott, Northwood, Willimate) / Celeron® processor Chipsets: North Bridge: Intel® 845GV chipsets, FSB @ 533/400 MHz, supports Hyper-Threading Technology (see CAUTION 1) South Bridge: Intel® ICH4 VGA: Intel® Extreme Graphics, Max. 64MB VRAM Memory: 2 DDR DIMM slots, DDR1 and DDR2 supports PC2700 (DDR333) /РС2100 (DDR266), Max.
BIOS: A M I legal BIOS S u p p o r t s "Plug a n d Play" A C P I 1.1 c o m p l i a n c e w a k e up e v e n t s Supports jumperfree S M B I O S 2.3.1 s u p p o r t C P U frequency stepless control (only for a d v a n c e d u s e r s ' r e f e r e n c e , s e e C A U T I O N 7) OS: Microsoft® Windows® 9 8 S E / M E / 2 0 0 0 / X P compliant CAUTION! 1. About the setting of "Hyper Threading Technology", please 2. This motherboard will support PC2700(DDR333) at FSB 533MHz. 3.
1.3 Supported AGP VGA Cards List (for Windows 2000/Windows XP) I.
II.
2. Installation Pre-installation Precautions Take note of the following precautions before you install motherboard components or change any motherboard settings. 1. Unplug the power cord from the wall socket before touching any component. Failure to do so may cause severe damage to the motherboard, peripherals, and/or components. 2. To avoid damaging the motherboard components due to static electricity, NEVER place your motherboard directly on the carpet or the like.
2.2 Installation of Memory Modules (DIMM) P4i45GV motherboard provides two 184-pin DDR (Double Data Rate) DIMM slots. Please make sure to disconnect power supply before adding or A removing DIMMs or the system components. Installing a DIMM Step 1. Unlock a DIMM slot by pressing the retaining clips outward. Step 2. Align a DIMM on the slot such that the notch on the DIMM matches the break on the slot. О A Step 3. The DIMM only fits in one correct orientation.
2.3 Expansion Slots (PCI, AMR a n d AGI Slots) There are 3 PCI slots, 1 AMR slot, and 1 AGI slot on this motherboard. PCI slots: PCI slots are used to install expansion cards that have the 32-bit PCI interface. Because the installed AMR card will occupy the same external connecting position with the PCI card installed in "PCI3" slot, you will no be able to install any PCI card in "PCI3" slot if an AMR card has already been installed in the AMR slot.
2.4 "Easy Dual Monitor" Thanks to ASRock patented AGI8X Technology, this motherboard supports Easy Dual Monitor upgrade. With the internal onboard VGA and the external add-on AGP VGA card, you can easily enjoy the benefits of Dual Monitor feature. For the detailed instruction, please refer to the document at the following path in the Support CD: .A Easy Dual Monitor 2.5 Jumpers Setup The illustration shows how jumpers are setup. When the jumper cap is placed on pins, the jumper is "SHORT'.
2.6 Onboard Headers and Connectors Onboard headers and connectors are NOT jumpers. Do NOT place Ł jumper caps over these headers and connectors. Placing jumper caps over the headers and connectors will cause permanent damage of the motherboard! _Figure Connector Description FDD Connector (33-pin FLOPPY1) КPINI (seep.2, No. 13) FLOPPY1 the red-striped side to Pin1 Note: Make sure the red-striped side of the cable is plugged into Pin1 side of the connector.
Internal Audio Connectors These connectors allow you CD-RGND- (4-pin CD1,4-pin AUX1) CD1 I (CD1: see p.2, No. 27) A JX-RGNDGNDAUX-L- (AUX1: see p.2, No. 26) Front Panel Audio Header AUX1 U BAOOUT-R (9-pin A U D I 0 1 ) IBACKOUT-L (see p.2, No. 25) AUD-OUT-L 'GND AJD-OUL-P MIC-POWTR MIC i (9-pin PANEL1) This is an interface for front panel audio cable that allows control of audio devices. This header accommodates PLED+ .PLEDI PWRBTN# I&ND dates several system front и (see p.2, No.
3. BIOS Information The BIOS Setup Utility is stored in the BIOS FWH chip. When you start up the computer, please press during the Power-On-Self-Test (POST) to enter the BIOS Setup Utility; otherwise, POST continues with its test routines.
